Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 170)

144 Unified IP MIB Reference
53-1003106-01
Image version
5
Name, OID, and syntax Access Description
snAgImgVer
brcdIp.1.1.2.1.11
Syntax: DisplayString Read-only Shows the version of the running software. The software image file
name is displayed in the following format.
major.minor.maintenance[letters]
It can have up to 32 characters.
snAgFlashImgVer
brcdIp.1.1.2.1.12
Syntax: DisplayString Read-only Shows the version of the software image that has been saved in the
local storage, such as the flash memory. The software image file
name is displayed in the following format:
major.minor.maintenance[letters]
It can have up to 32 characters.
If this file is unknown or not available, then this object displays a null
string.
snAgGblIfIpAddr
brcdIp.1.1.2.1.13
Syntax: Integer Read-write Shows the IP address of the interface.
snAgGblIfIpMask
brcdIp.1.1.2.1.14
Syntax: Integer Read-write Shows the IP address mask of the interface.
snAgGblPassword
brcdIp.1.1.2.1.15
Syntax: DisplayString Read-write Shows the system security access password, which is used only for an
SNMP-Set. An SNMP-Get will return a zero string.
If the password-change any command (the default) is configured on
the device, then this object must be part of the SNMP Set operation
on some critical SNMP objects.
The value of this object depends on the authentication method for
SNMP operation:
•
If there is no AAA authentication configuration for SNMP, then
this object will have the enable super-user password.
•
If AAA authentication for SNMP is configured and has the leading
method as “enable” or “line”, this object will have the
corresponding “enable” or “line” password.
•
If the switch has AAA authentication for SNMP operation, and
the method specified is one of local, TACACS+, or RADIUS, this
object will have the username password format with one space
character between username and password.
The maximum size allows concatenation of 48 octets of username
and 48 octets of password, with one blank character
Refer to
“Configuration notes” for more details.
Valid values: Up to 48 octets
snAgGblDataRetrieveMod
e
brcdIp.1.1.2.1.19
Syntax: Integer Read-write Retrieves the VLAN Table and Port-STP Table data as indicated by the
selected mode. The mode can be one of the following:
•
nextbootCfg(0) – Retrieves the next boot configuration data.
•
operationalData(1) – Retrieves the current running data.
Default: nextbootCfg(0)