Fdryipsrcguardportvlanvla nid, Fdryipsrcguardportvlanen able, Ip source guard binding table – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 406: Fdryipsrcguardbindipaddr, Fdryipsrcguardbindvlanid, Fdryipsrcguardbindrowst atus, Fdryipsrcguardbindmode, Fdryipsrcguardbindtype
380
Unified IP MIB Reference
53-1003106-01
IP source guard binding table
37
IP source guard binding table
The following table is used to configure IP source entries.
fdryIpSrcGuardPortVlanVla
nId
brcdIp.1.1.3.37.2.1.1.2
Syntax: VlanIndex
None
The number of VLANs for IP source guard per port per VLAN.
fdryIpSrcGuardPortVlanEn
able
brcdIp.1.1.3.37.2.1.1.3
Syntax: TruthValue
Read-write
This object indicates whether IP source guard is enabled at this
interface and this VLAN number. If this object is set to “true”, IP source
guard per port per VLAN is enabled. If this object is set to “false”, IP
source guard per port per VLAN is disabled.
Name, OID, and syntax
Access
Description
Name, OID, and syntax
Access
Description
fdryIpSrcGuardBindTable
brcdIp.1.1.3.37.3.1
None
This table provides the IP addresses used for IP source guard on each
physical interface with or without specific VLAN memberships.
fdryIpSrcGuardBindIpAddr
brcdIp.1.1.3.37.3.1.1.1
Syntax: IpAddress
None
The IP address of the device.
fdryIpSrcGuardBindVlanId
brcdIp.1.1.3.37.3.1.1.2
Syntax: VlanIndex
Read-create
This object indicates the specific VLAN memberships on this
interface. The VLAN number is optional. If you configure a VLAN
number, the binding applies only to that VLAN. If you do not configure
a VLAN number, the static applies to all VLANs associated with the
port. In this case, the VLAN number will be displayed as “0”.
fdryIpSrcGuardBindRowSt
atus
brcdIp.1.1.3.37.3.1.1.3
Syntax: RowStatus
Read-create
This variable is used to create or delete a row in this table. When a
row in this table is in active(1) state, no objects in that row can be
modified except this object.
fdryIpSrcGuardBindMode
brcdIp.1.1.3.37.3.1.1.4
Syntax: BindMode
Read-only
The mode of the IP source guard entry:
•
other(1)
•
active(2)
•
inactive(3)
fdryIpSrcGuardBindType
brcdIp.1.1.3.37.3.1.1.5
Syntax: BindType
Read-only
The type of the IP source guard entry:
•
other(1)
•
ip(2)