Snnetflowaggregationenable, Snnetflowaggregationrowstatus, Netflow export interface table – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 326: Snnetflowiftable, Snnetflowifindex, Snnetflowifflowswitching, Sflow, Sflow collector table, Snsflowcollectortable, Snsflowcollectorindex
300
Unified IP MIB Reference
53-1003106-01
sFlow
22
NetFlow Export interface table
The following table contains information about the switching type in every NetFlow Export interface.
sFlow
This section presents the sFlow objects that are proprietary to products.
sFlow collector table
Currently, RFC 3176 allows only one sFlow destination to be configured. To configure two or more
destinations, use the following table.
snNetFlowAggregationEnable
brcdIp.1.1.3.18.3.1.8
Syntax: Integer
Read-write
Indicates if NetFlow Export aggregation for this
aggregation scheme is enabled:
•
disabled(0)
•
enabled(1)
Default: disabled(0)
snNetFlowAggregationRowStatus
brcdIp.1.1.3.18.3.1.9
Syntax: Integer
Read-write
Creates or deletes a NetFlow Export aggregation table
entry:
•
other(1)
•
valid(2)
•
delete(3)
•
create(4)
Name, OID, and syntax
Access
Description
snNetFlowIfTable
brcdIp.1.1.3.18.4
None
Shows a list of interface entries. The number of entries is given by
the value of ifNumber.
snNetFlowIfIndex
brcdIp.1.1.3.18.4.1.1
Syntax: Integer
Read-only
Shows a unique value, greater than zero, for each interface.
Valid values: 1 – 65536
It is recommended that values are assigned contiguously starting
with 1. The value for each interface sub-layer must remain constant
at least from one re-initialization of the entity’s network
management system to the next re-initialization.
snNetFlowIfFlowSwitching
brcdIp.1.1.3.18.4.1.2
Syntax: Integer
Read-write
Indicates if flow switching in a particular interface is enabled:
•
disable(0)
•
enable(1)
Name, OID, and syntax
Access
Description
Name, OID, and syntax
Access
Description
snSflowCollectorTable
brcdIp.1.1.3.19.2
None
Table of sFlow collectors, beginning with the second collector.
Configure the first sFlow collector using the sFlowCollectorAddress
and sFlowCollectorPort objects in the RFC 3176 sFlowTable.
snSflowCollectorIndex
brcdIp.1.1.3.19.2.1.1
Syntax: Integer32
Read-only
The index to the sFlow collector table.