Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 177)

Unified IP MIB Reference 151
53-1003106-01
Agent board table
5
Agent board table
The agent board table provides information about the boards. It contains the board ID, board
status, LEDs, status, and other information about the main and expansion boards.
snAgGblTelnetLoginTimeo
ut
brcdIp.1.1.2.1.60
Syntax: Integer Read-write Indicates how many minutes you have to log in before Telnet is
disconnected.
Valid values: 1 – 10 minutes
Default: 1 minute
snAgGblBannerExec
brcdIp.1.1.2.1.61
Syntax: DisplayString Read-write Enter a message that will be displayed when a user enters the
Privileged EXEC CLI level of a device.
Enter up to 2048 characters for this banner. Use the character "\n"
within the string to start a new line.
Leave this object blank if no message is to be displayed.
snAgGblBannerIncoming
brcdIp.1.1.2.1.62
Syntax: DisplayString Read-write Enter a message that will be displayed on the console when a user
establishes a Telnet session. This message includes the location
where the user is connecting from and displays a text message that
can be configured.
Enter up to 2048 characters for this banner. Use the character "\n"
within the string to start a new line.
Leave this object blank if no message is to be displayed.
snAgGblBannerMotd
brcdIp.1.1.2.1.63
Syntax: DisplayString Read-write Enter the message of the day that is displayed on a user’s terminal
when the user establishes a Telnet CLI session.
Enter up to 2048 characters for this banner. Use the character "\n"
within the string to start a new line.
Leave this object blank if no message is to be displayed.
snAgWebMgmtServerTcpP
ort
brcdIp.1.1.2.1.64
Syntax: Integer
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-write This object allows you to specify which TCP port will be used for the
Web Management Interface. Also, Element Manager of Brocade
Network Advisor will query the device for this port number before it
sends HTTP packets to the device.
Enter a number from 1 through 65535.
snAgGblDeleteFirstBefore
Download
brcdIp.1.1.2.1.67
Syntax: TruthVal
NOTE: This object is not
supported on the
Brocade FastIron
devices.
Read-write When set to true, deletes the existing target file on the Management
module flash. This object can be set to true only when the
snAgImgLoad is set to downloadMPPrimary(20),
downloadMPSecondary(22), downloadSPPrimary(24),
downloadSPSecondary(25), or downloadMPMonitor(31) in the same
SNMP set request PDU.
This object is reset to false after successful or unsuccessful download
of specified file to flash. Reading this object returns false(2).
Name, OID, and syntax Access Description