Lldpremtableschange, Lldpxmedtopologychang edetected, Standard traps – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 708: System status traps, Coldstart, Warmstart, Linkdown
682
Unified IP MIB Reference
53-1003106-01
Standard traps
67
Standard traps
This section describes the supported standard traps.
System status traps
Brocade supports the following traps from RFC 1215 and RFC 2863.
lldpRemTablesChange
1.0.8802.1.1.2.1.4.1
None
An lldpRemTablesChange notification is sent when the value of
lldpStatsRemTableLastChangeTime changes. It can be used by an
NMS to trigger LLDP remote systems table maintenance polls.
NOTE: Transmission of lldpRemTablesChange notifications is
throttled by the agent, as specified by the
lldpNotificationInterval object.
lldpXMedTopologyChang
eDetected
1.0.8802.1.1.2.1.5.479
5.0.1
None
Allows a device to transfer information related to topology changes
to management applications in an asynchronous manner.
Specifically, this enables notification of the fact that a new remote
device was connected to the local port of an LLDP-MED network
connectivity device, or that a remote device was removed from the
local port. The purpose of this notification is efficient,
near-real-time transmission of information regarding moves and
changes to the management applications. Information carried by
the list of objects (varbind) contained in the notification allows the
receiving management application to uniquely identify the local
port where the topology change occurred, as well as the device
capability of the remote endpoint device that was attached to or
removed from the port.
Name, OID, and syntax
Access
Description
Trap name and number
Varbind
Description
coldStart
1.3.6.1.6.3.1.1.5.1
None
Indicates that the sending protocol entity is reinitializing itself; the
agent's configuration or the protocol entity implementation may be
altered.
warmStart
1.3.6.1.6.3.1.1.5.2
None
Indicates that the sending protocol entity is reinitializing itself;
however, the agent configuration or the protocol entity
implementation is not altered.
linkDown
1.3.6.1.6.3.1.1.5.3
ifEntry.ifInd
ex,
ifEntry.ifDe
scr,
ifEntry.ifAd
minStatus,
ifEntry.ifOp
erStatus,
ifXEntry.ifAl
ias
A linkDown trap signifies that the SNMP entity acting in an agent role,
has detected that the ifOperStatus object for one of its
communication links is about to enter the down state from some
other state (but not from the notPresent state). This other state is
indicated by the included value of ifOperStatus.