Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 358)

332 Unified IP MIB Reference
53-1003106-01
MRP table
26
snMetroRingRowStatus
brcdIp.1.1.3.29.2.1.1.10
Syntax: Integer Read-write Creates and deletes rows in the table, and controls whether they
are used. Values are:
•
delete(3) - Deletes a row.
•
create(4) - Creates a new row.
If the row exists, then a SET with a value of create(4) returns a
“bad value” error. Deleted rows disappear immediately. The
following values can be returned on reads:
•
noSuchName - No such row
•
other(1) - Some other cases.
•
valid(2) - The row exists and is valid.
snMetroRingOperState
brcdIp.1.1.3.29.2.1.1.11
Syntax: Integer Read-only Shows the metro ring operational state.
Valid values:other(1), enabled(2), disabled(3)
snMetroRingTopoGroupId
brcdIp.1.1.3.29.2.1.1.12
Syntax: Integer32 Read-only The ID of the topology group that controls the metro ring.
snMetroRingRHPTransmitted
brcdIp.1.1.3.29.2.1.1.13
Syntax: Counter32 Read-only The Ring Health Protocol (RHP) transmitted counter.
snMetroRingRHPReceived
brcdIp.1.1.3.29.2.1.1.14
Syntax: Counter32 Read-only The Ring Health Protocol (RHP) received counter.
snMetroRingStateChanged
brcdIp.1.1.3.29.2.1.1.15
Syntax: Counter32 Read-only The counter for the number of times the ring state has changed.
snMetroRingTCRBPDUReceived
brcdIp.1.1.3.29.2.1.1.16
Syntax: Counter32 Read-only The topology change protocol received counter.
snMetroRingPriPort
brcdIp.1.1.3.29.2.1.1.17
Syntax: InterfaceIndex Read-only The ifIndex value of the primary port.
snMetroRingSecPort
brcdIp.1.1.3.29.2.1.1.18
Syntax: InterfaceIndex Read-only The ifIndex value of the secondary port.
snMetroRingPriPortState
brcdIp.1.1.3.29.2.1.1.19
Syntax: Integer Read-only The state of the metro ring primary port:
•
other(1) - None of the cases below.
•
preforwarding(2) - Port transmits RHP packets; port does
not transmit data packets.
•
forwarding(3) - Port transmits RHP and data packets.
•
blocking(4) - Port receives RHP packets; does not receive
data packets.
•
disabled(5) - Port is disabled from the metro ring.
Name, OID, and syntax Access Description