Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 445)

Unified IP MIB Reference 419
53-1003106-01
Chapter
42
IP VRRP MIB Definition
In this chapter
• VRRP and VRRP-Extended MIBs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419
• VRRP interface table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
• VRRP and VRRP-E interface table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421
• VRRP virtual router table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421
• VRRP and VRRP-E virtual router configuration table . . . . . . . . . . . . . . . . . 426
VRRP and VRRP-Extended MIBs
The following table contains the global objects that apply to Virtual Router Redundancy Protocol
(VRRP), Virtual Router Redundancy Protocol Extended (VRRP-E), and Virtual Switch Redundancy
Protocol (VSRP).
Name, OID, and syntax Access Description
snVrrpGroupOperMode
brcdIp.1.2.12.1.1
Syntax: Integer
NOTE: This object is supported
on the Brocade MLXe,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES,
and Brocade NetIron
CER series devices.
Read-write Indicates if VRRP is enabled for this system:
•
disabled(0) – Disable VRRP.
•
enabled(1) – Activate VRRP.
Default: disabled(0)
snVrrpIfStateChangeTrap
brcdIp.1.2.12.1.2
Syntax: Integer Read-write Indicates if the SNMP agent process has been enabled to
generate VRRP interface state change traps:
•
disabled(0)
•
enabled(1)
Default: enabled(1)
NOTE: The standard MIB “vrrpNotificationCntl” will work exactly
the same as the Multi-Service IronWare Proprietary MIB
"snVrrpIfStateChangeTrap”.
snVrrpIfMaxNumVridPerIntf
brcdIp.1.2.12.1.3
Syntax: Integer Read-only Indicates the maximum number of VRID per interface.