Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 45)

Unified IP MIB Reference 19
53-1003106-01
RFC 2863: The Interfaces Group MIB
2
On the Brocade FastIron devices, there will be 64 ifIndexes per module.
Table 3 details the Brocade FastIron index ranges and they are subject to change from one release
to the next.
IfIndex assignment persistance
The following interfaces have ifIndex assignments that are persistent across reboots and
switchover operations:
• Physical ports
TABLE 2 XMR or MLX index ranges
4-slot 8-slot 16-slot 32-slot Allocation
Physical port 1-192 1-384 1-768 1-1536 20 per slot
(NetIron release
3.7 and later)
40 per slot
(NetIron releases
prior to 3.7)
48 per slot
(NetIron releases
prior to 5.2)
Mgmt port 2 2 2 2 1 active, 1
standby
Virtual port 255 default, 40
minimum, 4096
maximum 255 default, 40
minimum, 4096
maximum 255 default, 40
minimum, 4096
maximum 255 default,
40 minimum,
4096
maximum
Loopback port 64 default 64 default 64 default 64 default
IP tunnels 8192 8192 8192 8192
MPLS tunnels 16384 16384 16384 16384
Trunk 128 default, 128
minimum, 256
maximum 128 default, 128
minimum, 256
maximum 128 default, 128
minimum, 256
maximum 128 default,
128
minimum,
256 maximum
TABLE 3 Brocade FastIron devices index ranges
Brocade FCX Brocade ICX 6610 Brocade
FastIron SX800 Brocade FastIron
SX1600
Physical port 256 maximum 256 maximum 10x64(640) 18x64(1152)
Mgmt port 1 1 2 2
Virtual port 255 default, 512
maximum 255 default, 512
maximum 255 default,
512 maximum 255 default, 512
maximum
GRE tunnel 16 default, ranges
from 16 to 64 16 default, ranges from
16 to 64 16 default,
ranges from 16
to 64 16 default, ranges
from 16 to 64
Loopback port 8 default 8 default 8 default 8 default
Trunk 8 maximum 8 maximum 8 maximum 8 maximum