Brcdtmucastqstatswreddroppedbyte s, Brcdtmucastqstatsmaxqdepthsincela stread, Brcdtmucastqstatsqsize – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 415: Brcdtmucastqstatscreditcount, Traffic manager multicast voq statistics table, Brcdtmmcastqstatstable, Brcdtmmcastqstatsslotid, Brcdtmmcastqstatstmdeviceid, Brcdtmmcastqstatspriority, Brcdtmmcastqstatsdescription

Unified IP MIB Reference
389
53-1003106-01
Traffic Manager multicast VOQ statistics table
39
Traffic Manager multicast VOQ statistics table
The Traffic Manager multicast VOQ statistics table contains information about the queue-related
statistics. Use the show tm-voq-stat src_port [ethernet | pos] slot/port multicast [priority | all] CLI
command for information about the Traffic Manager multicast queue-related statistics.
NOTE
The following table contains information about the Traffic Manager multicast VOQ statistics on the
NI-MLX-1Gx48-T, NI-MLX-1Gx24, NI-MLX-10Gx8, BR-MLX-100Gx2, and all the POS modules.
brcdTMUcastQStatsWREDDroppedByte
s
brcdIp.1.14.2.2.3.1.15
Syntax: Counter64
Read-only
Shows the count of all bytes entering ingress queues on
the Traffic Manager but dropped due to WRED.
brcdTMUcastQStatsMaxQDepthSinceLa
stRead
brcdIp.1.14.2.2.3.1.16
Syntax: Counter64
Read-only
Indicates the maximum queue depth since last access
to read.
brcdTMUcastQStatsQSize
brcdIp.1.14.2.2.3.1.17
Syntax: Unsigned32
Read-only
Shows the current size of the queue.
brcdTMUcastQStatsCreditCount
brcdIp.1.14.2.2.3.1.18
Syntax: Unsigned32
Read-only
Shows the current credit count of the queue.
Name, OID, and syntax
Access
Description
Name, OID, and syntax
Access
Description
brcdTMMcastQStatsTable
brcdIp.1.14.2.2.4
None
The Traffic Manager multicast VOQ statistics table.
brcdTMMcastQStatsSlotId
brcdIp.1.14.2.2.4.1.1
Syntax: Unsigned32
None
Shows the slot ID of the LP module that uniquely
identifies a line card. The LP module must be
physically present and operationally up.
brcdTMMcastQStatsTMDeviceId
brcdIp.1.14.2.2.4.1.2
Syntax: Unsigned32
None
Shows the Traffic Manager device ID that uniquely
identifies the Network Processor Traffic Manager
within a line card in the system.
brcdTMMcastQStatsPriority
brcdIp.1.14.2.2.4.1.3
Syntax: Integer
None
Shows the priority of the packets that will be stored
in the queue. Two consecutive priorities are stored
in one multicast queue. There are 4 multicast
queues per Traffic Manager for 8 priorities:
•
Priority1And2 (1)
•
Priority3And4 (3)
•
Priority5And6 (5)
•
Priority7And8 (7)
brcdTMMcastQStatsDescription
brcdIp.1.14.2.2.4.1.4
Syntax: DisplayString
Read-only
This object gives the range of ports serviced by
brcdTMMcastQStatsTMDeviceId and priorities
serviced by the queue.