Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 464)

438 Unified IP MIB Reference
53-1003106-01
MCT cluster client table
43
brcdMctClusterClientOperSt
atus
brcdIp.1.1.12.1.1.5.1.4
Syntax: Integer Read-create The operational status of the MCT cluster client. The following
values are supported by the operational status:
•
unknown(1)—Indicates the unknown state.
•
noState(2)—Indicates the peer state machine is not started.
•
init(3)—Indicates the peer state machine is initializing.
•
localDeploy(4)—Indicates the client is up, but is not configured
at the remote side.
•
adminUp(5)—Indicates the client is up, but both the client
interfaces are operationally down.
•
remoteUp(6)—Indicates the client is remotely up and locally
down.
•
localUp(7)—Indicates the client is locally up and remotely
down.
•
up(8)—Indicates the client is up both locally and remotely.
•
slave(9)—Indicates the client is down and it has taken the
slave role.
•
master(10)—Indicates the client is down and it has taken the
master role.
•
masterPeerUp(11)—Indicates the client is down, it has taken
the master role, and the master peer is up.
brcdMctClusterClientDeploy
brcdIp.1.1.12.1.1.5.1.5
Syntax: BrcdDeployStatus Read-create The administration status of the MCT cluster client. When the
object is set to deploy and the cluster is not deployed, the
configuration happens but the client state machine will not get
started.
NOTE: The objects in the table cannot be modified except the
brcdMctClusterClientDeploy object, after the client is
deployed.
brcdMctClusterClientDeploy
FailureReason
brcdIp.1.1.12.1.1.5.1.6
Syntax: Integer Read-only The failure reasons for the last cluster client deploy operation
through SNMP. The following failure reasons are supported:
•
none(1)—Indicates the last deploy is successful.
•
unknown(2)—Indicates the last deploy is failed for an unknown
reason.
•
rBridgeIdNotConfigured(3)—Indicates the remote bridge ID is
not configured.
•
clientInterfaceNotConfigured(4)—Indicates the client interface
is not configured.
•
rBridgeIdUsedInClusterOrPeer(5)—Indicates the remote bridge
ID is used in cluster or peer configurations.
•
clientInterfaceNotPresent(6)—Indicates the client interface is
physically not present.
•
clientInterfaceIsMrpRingInterface(7)—Indicates the client
interface is configured as an MRP ring interface.
•
clientInterfaceIsErpInterface(8)—Indicates the client interface
is configured as an ERP interface.
•
iclIsNotInMemberVlan(9)—Indicates the ICL is not in the
member VLAN.
brcdMctClusterClientRowSt
atus
brcdIp.1.1.12.1.1.5.1.7
Syntax: RowStatus Read-create The row status of the MCT cluster client. All the values of the row
status are supported. The notInService(2) value indicates the
cluster client is not deployed.
The brcdMctClusterClientRbridgeId and brcdMctClusterClientIfIndex
objects must be present in the same SNMP SET request to create a
new row with the brcdMctClusterClientRowStatus object set to the
createAndGo(4) value.
Name, OID, and syntax Access Description