Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 612)

586 Unified IP MIB Reference
53-1003106-01
LAG LACP port table
59
LAG LACP port table
The following table list the MIB objects of the Link Aggregation Group (LAG) LACP port table.
NOTE
The following table is supported on the Brocade FastIron SX, Brocade ICX, and Brocade FCX devices.
Name, OID, and syntax Access Description
fdryLinkAggregationGroupLacpPortTabl
e
brcdIp.1.1.3.33.3.1 None Table contains Link Aggregation control information about
every LACP port associated with the device. A row is
created in the table for each physical port.
fdryLinkAggregationGroupLacpPortAd
minStatus
brcdIp.1.1.3.33.3.1.1.1
Syntax: Integer Read-only The current admin state of the interface. The testing(3)
state indicates that no operational packets can be passed.
Valid values:
•
up(1) -- Ready to pass packets
•
down(2)
•
testing(3) -- In some test mode
fdryLinkAggregationGroupLacpPortLink
Status
brcdIp.1.1.3.33.3.1.1.2
Syntax: Integer Read-only The current operational state of the interface. The
testing(3) state indicates that no operational packets can
be passed.
Valid values:
•
up(1) -- Ready to pass packets
•
down(2)
•
testing(3) -- In some test mode
fdryLinkAggregationGroupLacpPortLac
pStatus
brcdIp.1.1.3.33.3.1.1.3
Syntax: Integer Read-only The current LACP state of the interface.
Valid values:
•
operation(1)
•
down(2)
•
blocked(3)
•
inactive(4)
•
pexforceup(5)
fdryLinkAggregationGroupLacpPortLac
pSysID
brcdIp.1.1.3.33.3.1.1.4
Syntax: Physical address Read-only The LACP system ID of the LAG.
fdryLinkAggregationGroupLacpPortLac
pKey
brcdIp.1.1.3.33.3.1.1.5
Syntax: Integer Read-only The LACP key ID of the interface.
fdryLinkAggregationGroupLacpPortLac
pRemoteSysID
brcdIp.1.1.3.33.3.1.1.6
Syntax: Physical address Read-only The LACP remote system ID of the LAG.
fdryLinkAggregationGroupLacpPortLac
pRemoteKey
brcdIp.1.1.3.33.3.1.1.7
Syntax: Integer Read-only The LACP remote key ID of the interface.