Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 568)

542 Unified IP MIB Reference
53-1003106-01
IP RIP redistribution table
52
snRtIpRipRedisAction
brcdIp.1.2.3.3.1.2
Syntax: Integer
NOTE: This object is not
supported on the
Brocade NetIron
and Brocade
FastIron devices.
Read-write Indicates what to do if routes match this IP RIP redistribution entry.
•
deny(0)
•
permit(1)
snRtIpRipRedisProtocol
brcdIp.1.2.3.3.1.3
Syntax: Integer Read-write Indicates which protocol is to be distributed:
•
other(1) – Cannot be used for SNMP-SET.
•
all(2)
•
static(3)
•
ospf(4)
•
bgp(5)
•
isis(6)
snRtIpRipRedisIp
brcdIp.1.2.3.3.1.4
Syntax: IpAddress
NOTE: This object is not
supported on the
Brocade NetIron
and Brocade
FastIron devices.
Read-write Shows the IP address of the IP route to be distributed. The address
0.0.0.0 means that all routes will be distributed.
snRtIpRipRedisMask
brcdIp.1.2.3.3.1.5
Syntax: IpAddress
NOTE: This object is not
supported on the
Brocade NetIron
and Brocade
FastIron devices.
Read-write Shows the IP subnet mask of the IP route to be distributed.
snRtIpRipRedisMatchMetri
c
brcdIp.1.2.3.3.1.6
Syntax: Integer
NOTE: This object is not
supported on the
Brocade NetIron
and Brocade
FastIron devices.
Read-write Specifies the metric of the route to be matched to determine the
redistribution.
Valid values: 0 – 65535. A value of 0 means that any metric value will
be matched.
snRtIpRipRedisSetMetric
brcdIp.1.2.3.3.1.7
Syntax: Integer Read-write Specifies the new metric of the route to be advertised.
Valid values: 0 – 15. A value of 0 indicates that the default metric will
be used.
Name, OID, and syntax Access Description