Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 648)

622 Unified IP MIB Reference
53-1003106-01
BFD session table
63
bfdSessRemoteHeardFlag
brcdIp.3.3.1.1.2.1.7
Syntax: TruthValue Read-only Status of BFD packet reception from the remote system:
•
true(1) - The local device is actively receiving BFD packets
from the remote device.
•
false(0) - Either the local device has not received BFD
packets recently (within the detection time) or the local
device is attempting to tear down the BFD session.
bfdSessDiag
brcdIp.3.3.1.1.2.1.8
Syntax: Unsigned32 Accessible-f
or-notify A diagnostic code specifying the local system's reason for the last
transition of the session from up(1) to some other state.
The following values are applicable in the implementation of this
MIB object:
•
No Diagnostic(1)
•
Control Detection Time Expired(2)
•
Echo Failed(3)
•
Neighbor Signaled Session Down(4)
•
Forwarding Plan Reset(5)
•
Path Down(6)
•
Concatenated Path Down(7)
•
Admin Down(8)
•
Reverse Concatenated Path Down(9)
Each notification uses one of the following varbinds:
•
bfdSessUp - High range value
•
bfdSessDown - Low range value
bfdSessOperMode
brcdIp.3.3.1.1.2.1.9
Syntax: Integer Read-only Specifies the current operating mode of the BFD session:
•
asyncModeWEchoFun(1)
•
asynchModeWOEchoFun(2)
•
demandModeWEchoFunction(3)
•
demandModeWOEchoFunction(4)
bfdSessDemandModeDesired
Flag
brcdIp.3.3.1.1.2.1.10
Syntax: TruthValue Read-only Indicates if the device uses the demand mode:
•
true(1) - The device will use demand mode.
•
false(0) - The device will use demand mode.
bfdSessEchoFuncModeDesire
dFlag
brcdIp.3.3.1.1.2.1.11
Syntax: TruthValue Read-only Indicates if the device uses Echo mode:
•
true(1) - The device will use Echo mode.
•
false(0) - The device will use Echo mode.
bfdSessControPlanIndepFlag
brcdIp.3.3.1.1.2.1.12
Syntax: TruthValue Read-only Indicates if the device can continue to function when there is a
disruption of the control plane:
•
true(1) - The local system BFD implementation is
independent of the control plane.
•
false(0) - The local system BFD implementation is dependent
on the control plane.
bfdSessAddrType
brcdIp.3.3.1.1.2.1.13
Syntax: InetAddressType Read-only The IP address type of the interface associated with this BFD
session:
•
unknown(0) - Allowed only when the outgoing interface is of
the type point-to-point, or when the BFD session is not
associated with a specific interface.
•
ipv4(1) - IP address is IPv4.
•
ipv6(2) - IP address is IPv6.
Name, OID, and syntax Access Description