Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 606)

580 Unified IP MIB Reference
53-1003106-01
Rate limit counter table
58
Rate limit counter table
The following table shows rate limit counter entries.
snPortCARLimit
brcdIp.1.1.3.16.1.1.1.7
Syntax: Integer32 Read-only Shows the normal burst size in bytes. Normal burst size is the
number of bytes that are guaranteed to be transported by the
network at the average rate under normal conditions during the
committed time interval.
snPortCARExtLimit
brcdIp.1.1.3.16.1.1.1.8
Syntax: Integer32 Read-only Shows the extended burst limit in bytes. The extended burst limit
determines how large traffic bursts can be before all the traffic
exceeds the rate limit.
snPortCARConformAction
brcdIp.1.1.3.16.1.1.1.9
Syntax: Integer Read-only Indicates what happens to packets when the traffic is within the rate
limit:
•
continue(1) – Continue to evaluate the subsequent rate limits.
•
drop(2) – Drop the packet.
•
precedCont(3) – Rewrite the IP precedence and allow it after
evaluated by subsequent rate limits.
•
precedXmit(4) – Rewrite the IP precedence and transmit the
packet.
•
xmit(5) – Transmit the packet.
snPortCARExceedAction
brcdIp.1.1.3.16.1.1.1.10
Syntax: Integer Read-only Indicates what happens to packets when the traffic exceeds the rate
limit:
•
continue(1) – Continue to evaluate the subsequent rate limits.
•
drop(2) – Drop the packet.
•
precedCont(3) – Rewrite the IP precedence and allow it after
evaluated by subsequent rate limits.
•
precedXmit(4) – Rewrite the IP precedence and transmit the
packet.
•
xmit(5) – Transmit the packet.
snPortCARStatSwitchedPkt
s
brcdIp.1.1.3.16.1.1.1.11
Syntax: Counter64 Read-only Indicates the number of packets permitted by this rate limit.
snPortCARStatSwitchedByt
es
brcdIp.1.1.3.16.1.1.1.12
Syntax: Counter64 Read-only Indicates the number of bytes permitted by this interface.
snPortCARStatFilteredPkts
brcdIp.1.1.3.16.1.1.1.13
Syntax: Counter64 Read-only Indicates the number of packets that exceeded this rate limit.
snPortCARStatFilteredBytes
brcdIp.1.1.3.16.1.1.1.14
Syntax: Counter64 Read-only Indicates the number of bytes that exceeded this rate limit.
snPortCARStatCurBurst
brcdIp.1.1.3.16.1.1.1.15
Syntax: Gauge32 Read-only Shows the current burst size of received packets.
Name, OID, and syntax Access Description