Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 81)

Unified IP MIB Reference 55
53-1003106-01
draft-ietf-idr-bgp4-mibv2-12 MIB
2
BGP4v2 per-peer error management information
The following table contains the BGP4v2 per-peer error management information objects.
NOTE
The following table is not supported on the Brocade NetIron CES 2000 series BASE Packages device.
bgp4V2PeerRemoteIdentifier
brcdIp.3.5.1.1.2.1.11
Syntax: Bgp4V2IdentifierTC Read-only Specifies the BGP identifier of the received remote BGP
peer.
The entry received must be 0.0.0.0 unless the
bgp4V2PeerState is in the openconfirm(5) or in
established(6) state.
bgp4V2PeerAdminStatus
brcdIp.3.5.1.1.2.1.12
Syntax: Integer Read-only Specifies whether the BGP finite state machine (FSM) for
the remote peer is halted or running, the BGP FSM for a
remote peer is halted after processing a stop event.
Likewise, if in the running state after processing a start
event.
The bgp4V2PeerState is in the idle state when the FSM is
halted. Although, some extensions such as Graceful Restart
leaves the peer in the idle state with the FSM running.
•
halted(1)
•
running(2)
bgp4V2PeerState
brcdIp.3.5.1.1.2.1.13
Syntax: Integer Read-only Indicates the BGP peer connection states:
•
idle(1)
•
connect(2)
•
active(3)
•
opensent(4)
•
openconfirm(5)
•
established(6)
bgp4V2PeerDescription
brcdIp.3.5.1.1.2.1.14
Syntax: SnmpAdminString Read-only Specifies a user-configured description identifying the peer.
The object must contain a description that is unique within
the existing BGP instance for the peer.
Name, OID, and syntax Access Description
bgp4V2PeerErrorsTable
brcdIp.3.5.1.1.3 None On a per-peer basis, the table reflects the last
protocol-defined error encountered and reported on the peer
session.
bgp4V2PeerLastErrorCodeReceived
brcdIp.3.5.1.1.3.1.1
Syntax: Unsigned32 Read-only Specifies the last error code received from the peer through a
notification message on the connection. The field is zero(0), if
no error occurs.
bgp4V2PeerLastErrorSubCodeRece
ived
brcdIp.3.5.1.1.3.1.2
Syntax: Unsigned32 Read-only Specifies the last error subcode received from the peer
through a notification message on the connection. The field is
zero(0), if no error occurs.
bgp4V2PeerLastErrorReceivedTime
brcdIp.3.5.1.1.3.1.3
Syntax: TimeStamp Read-only Indicates the time stamp when the last notification is
received from the peer.
Name, OID, and syntax Access Description