Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 248)

222 Unified IP MIB Reference
53-1003106-01
CAM profile
10
CAM profile
The following object identifies CAM partition profiles. Each profile adjusts the partitions to optimize
the device for corresponding applications.
CAM usage for Layer 3 traffic
The following table contains information about the CAM usage on the device by Layer 3 traffic.
snCamStatAddIPXCount
brcdIp.1.1.2.12.3.1.26
Syntax: Counter Read-only CAM add IPX count.
snCamStatDeleteDMACamCount
brcdIp.1.1.2.12.3.1.27
Syntax: Counter Read-only CAM delete DMA CAM count.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snCamProfile
brcdIp.1.14.1.1.1.1
Syntax: Integer Read-only Identifies the CAM partition profile. Each profile adjusts the partitions to
optimize the device for corresponding applications.
Displays one of the following:
•
default(1)
•
ipv4(2)
•
ipv4Ipv6(3)
•
ipv4Ipv62(4)
•
ipv4Vpls(5)
•
ipv4Vpn(6)
•
ipv6(7)
•
l2Metro(8)
•
l2Metro2(9)
•
mplsL3vpn(10)
•
mplsL3vpn2(11)
•
mplsVpls(12)
•
mplsVpls2(13)
•
mplsVpnVpls(14)
•
multiService(15)
•
multiService2(16)
•
multiService3(17)
•
multiService4(18)
Name, OID, and syntax Access Description
snCamUsageL3Table
brcdIp.1.14.1.1.2.1 None The CAM usage table for Layer 3 traffic.
snCamUsageL3Slot
brcdIp.1.14.1.1.2.1.1.1
Syntax: Unsigned32 None A number that uniquely identifies an interface module on the
device.