Traps for wireless features, Sntrapwirelessstationstatec hange, Sntrapwirelesssappstatech ange – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 743: Wireless feature traps, Wireless mobility traps

Unified IP MIB Reference
717
53-1003106-01
Proprietary traps
67
Traps for wireless features
NOTE
The traps in the following sections are available on devices that support the wireless features, such 
as automatic discovery and configuration (ADC), wireless mobility, and others. 
Wireless feature traps
The WLAN controller generates the following general traps for wireless feature support. Refer to the 
specific wireless feature sections to determine what traps are generated for each feature.
Wireless mobility traps
The following traps are generated by the WLAN controller for wireless mobility.
Trap name and number
Varbinds
Severity
Description and trap message
snTrapWirelessStationStateC
hange
brcdIp.0.127
NOTE: This object is not 
supported on 
Brocade NetIron 
MLX, Brocade MLXe, 
Brocade NetIron 
XMR, Brocade 
NetIron CES, and 
Brocade NetIron CER 
series devices.
snAgGblTrapMessage
Notification
The state of the wireless station (client) 
that is associated with this WLAN 
controller through the access point has 
changed. 
Sample trap message:
removed
snTrapWirelessSappStateCh
ange
brcdIp.0.129
NOTE: This object is not 
supported on 
Brocade NetIron 
MLX, Brocade MLXe, 
Brocade NetIron 
XMR, Brocade 
NetIron CES, and 
Brocade NetIron CER 
series devices.
snAgGblTrapMessage
Notification
The state of the communication between 
an access point and this WLAN controller 
has changed. 
Sample trap message:
state from 
to
