Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 690)

664 Unified IP MIB Reference
53-1003106-01
Real server history control table
65
Real server history control table
The real server history control table contains objects that control the collection of data samples for
real servers.
Name, OID, and syntax Access Description
snL4RealServerHistoryControlTable
brcdIp.1.1.4.28.1 None Real server history control table
snL4RealServerHistoryControlIndex
brcdIp.1.1.4.28.1.1.1
Syntax: Integer Read-only An index that uniquely identifies an entry in this table. Each
entry defines a set of samples at a particular interval for a real
server on the ServerIron.
Valid values: Up to 65535 entries.
snL4RealServerHistoryControlData
Source
brcdIp.1.1.4.28.1.1.2
Syntax: Object Identifier Read-write This object identifies the source of the historical data that was
collected for this entry. The source can be any real server on
this ServerIron.
It may not be modified if the value of the
“snL4RealServerHistoryControlStatus” object for this entry
source is equal to valid(1).
snL4RealServerHistoryControlBuck
etsRequested
brcdIp.1.1.4.28.1.1.3
Syntax: Integer Read-write The requested number of data samples that will be saved for
this entry. The number of samples saved in the
“snL4RealServerHistoryControlBucketsGranted” object should
be close to the value of this object. If the value of this object is
modified, then the value of the
“snL4RealServerHistoryControlBucketsGranted” object will be
adjusted according to the new value of this object.
Valid values: 1 – 65535
Default: 50
snL4RealServerHistoryControlBuck
etsGranted
brcdIp.1.1.4.28.1.1.4
Syntax: Integer Read-only The number of data samples actually saved for this entry.
If the value of the
“snL4RealServerHistoryControlBucketsRequested” object is
modified, then the actual number of samples saved by this
object will be adjusted accordingly.
If all the requested buckets are filled, a new bucket will be
added to the table, and the oldest bucket for the entry will be
deleted.
If the value of this object changes to a value less than the
current value, enough of the oldest entries will be deleted so
that the number of buckets does not exceed the new value of
this object.
If the value of this object changes to a value greater than the
current value, the number of buckets will increase but not
exceed the new value of this object.