Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 291)

Unified IP MIB Reference 265
53-1003106-01
Chapter
17
Stackable Management Group
In this chapter
• General stackable management information . . . . . . . . . . . . . . . . . . . . . . . 265
• Stackable management secondary switch information . . . . . . . . . . . . . . . 266
General stackable management information
The objects in the following table provide information about the general stacking devices.
NOTE
The objects in the following table are not supported on Brocade FCX, FastIron GS, and FastIron LS
stacking devices.
Name, OID, and syntax Access Description
snStackPriSwitchMode
brcdIp.1.1.5.1.1
Syntax: Integer Read-write The stackable management primary switch mode is either enabled or
disabled.
•
enabled(1) - Primary switch enabled.
•
disabled(0) - Primary switch disabled.
Default: disabled(0)
snStackMaxSecSwitch
brcdIp.1.1.5.1.2
Syntax: Integer Read-only The maximum number of secondary switches are allowed in the
stackable management group.
snStackTotalSecSwitch
brcdIp.1.1.5.1.3
Syntax: Integer Read-only The total number of secondary switches currently connected to the
stackable management group.
snStackSyncAllSecSwit
ch
brcdIp.1.1.5.1.4
Syntax: Integer Read-write Synchronize all the secondary switches in the stackable management
group with the following commands:
•
device(2)
•
global(3)
•
local(4)
The return result of the previous commands is either:
•
normal(0)
•
invalid(1)