Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 166)

140 Unified IP MIB Reference
53-1003106-01
Image and configuration file download and upload
5
snAgCfgLoad
(continued) The following values may be read:
•
normal(1)
•
flashPrepareReadFailure(2)
•
flashReadError(3)
•
flashPrepareWriteFailure(4)
•
flashWriteError(5)
•
tftpTimeoutError(6)
•
tftpOutOfBufferSpace(7)
•
tftpBusy(8)
•
tftpRemoteOtherErrors(9)
•
tftpRemoteNoFile(10)
•
tftpRemoteBadAccess(11)
•
tftpRemoteDiskFull(12)
•
tftpRemoteBadOperation(13)
•
tftpRemoteBadId(14)
•
tftpRemoteFileExists(15)
•
tftpRemoteNoUser(16)
•
operationError(17)
•
loading(18)
•
tftpWrongFileType(29)
•
operationDoneWithNMS(28)
•
tftpWrongFileType(29)
•
downloadToDramFromServerOverwrite(30)
The objects “snAgCfgFname” and “snAgTftpServerIp” are required to
allow the download or upload process to occur.
No write requests is allowed while a download or upload process is in
progress.
The snAgCfgEosTable objects must be sent along in one PDU for
network management systems to recognize values from (24) to (27).
A separate write memory using the CLI or an SNMP “set
snAgWriteNVRAM” is required to save the configuration to NVRAM.
This object requires a password to be set for the snAgGblPassword
object.
NOTE: The snAgTftpServerIp object is deprecated by the
snAgTftpServerAddrType object and the snAgTftpServerAddr
object supports both IPv4 and IPv6.
snAgTftpServerAddrType
brcdIp.1.1.2.1.65
Syntax: IpAddress Read-write Shows the TFTP server IP address type. The supported address types
are ipv4(1) and ipv6(2). The default address type is ipv4(1).
Name, OID, and syntax Access Description