Snl4realserverportcfgrowstatus, Snl4realserverportcfgdeletestate, Snl4realserverportcfgmaxconnections – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 675: Layer4 bind table, Snl4bindtable, Snl4bindindex, Snl4bindvirtualservername, Snl4bindvirtualportnumber, Snl4bindrealservername
Unified IP MIB Reference
649
53-1003106-01
Layer4 bind table
65
Layer4 bind table
NOTE
This table has been deprecated and use the snL4VirtualServerBindTable instead.
snL4RealServerPortCfgRowStatus
brcdIp.1.1.4.20.1.1.5
Syntax: L4RowStatus
Read-write
Controls the management of the table rows. The following
values can be written:
•
delete(3) – Deletes the row.
•
create(4) – Creates a new row.
•
modify(5) – Modifies an existing row.
If the row exists, then a SET with a value of create(4)
returns a "bad value" error. Deleted rows are removed
from the table immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
snL4RealServerPortCfgDeleteState
brcdIp.1.1.4.20.1.1.6
Syntax: L4DeleteState
Read-only
Shows the state of the port being deleted:
•
done(0) – The port is deleted.
•
waitunbind(1) – The port is in an unbind state
•
waitdelete(2) – The port is in a delete state
snL4RealServerPortCfgMaxConnections
brcdIp.1.1.4.20.1.1.7
Syntax: Integer
Read-write
Defines the maximum number of connections allowed
per port.
Enter a value up to 1000000.
Name, OID, and syntax
Access
Description
Name, OID, and syntax
Access
Description
snL4BindTable
brcdIp.1.1.4.6.1
None
The Bind table.
snL4BindIndex
brcdIp.1.1.4.6.1.1.1
Syntax: Integer
Read-only
The index for this entry. This must be unique and care must be
taken to assign an unused index when creating an entry.
snL4BindVirtualServerName
brcdIp.1.1.4.6.1.1.2
Syntax: L4ServerName
Read-write
Indicates the name of the virtual server.
Valid values: 1 – 32 octets
snL4BindVirtualPortNumber
brcdIp.1.1.4.6.1.1.3
Syntax: Integer
Read-write
Specifies the TCP or UDP port number on the virtual server that
will be bound to the real server.
Valid values: 0 – 65535
snL4BindRealServerName
brcdIp.1.1.4.6.1.1.4
Syntax: L4ServerName
Read-write
Indicates the name of the real server that has been configured
on the ServerIron.
Valid values: 1 – 32 octets