Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 727)

Unified IP MIB Reference 701
53-1003106-01
Proprietary traps
67
FSRP traps
The following traps can be used by the devices that support FSRP.
VSRP traps
The following traps can be used by the devices that support VSRP.
OSPF traps
The Brocade NetIron MLX, Brocade MLXe, Brocade NetIron XMR, Brocade NetIron CES, and
Brocade NetIron CER series devices support RFC 1850 and the objects in the following table are
not supported.
NOTE
You must configure the log adjacency command under the "router ospf" mode to see traps for the
following objects:
ospfIfStateChange trap
ospfNbrStateChange trap
ospfVirtIfStateChange trap
ospfVirtNbrStateChange trap
Trap name and number Varbinds Severity Description and trap message
snTrapVrrpIfStateChange
brcdIp.0.34 snAgGblTrapMessage Warning A VRRP routing device changed state from
master to backup or vice versa.
Sample trap message:
VRRP intf state changed, intf
, vrid , state
.
Trap name and number Varbinds Severity Description and trap message
snTrapFsrpIfStateChange
brcdIp.0.33 snAgGblTrapMessage Informational An FSRP routing device changed state from
active to standby or vice versa.
Sample trap message:
SRP_FSRP intf state changed,
intf , addr , state
.
Trap name and number Varbinds Severity Description
snTrapVsrpStateChange
brcdIp.0.83 snAgGblTrapMessage Informational A VSRP routing device changed its state.
snTrapVsrpCamError
brcdIp.0.84 snAgGblTrapMessage Informational A VSRP CAM error has occurred.