Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 313)

Unified IP MIB Reference 287
53-1003106-01
Brocade NP notification support table
20
Brocade NP notification support table
The following table is added to support the NP memory error notification objects.
NOTE
SNMP read-operations like SNMP-WALK, SNMP-GET, SNMP-GETNEXT or SNMP-GETBULK are not
supported.
NP debug statistics table
The following table contains the debug statistics of Network Processors in the line cards that are
supported only on the Brocade MLXe, Brocade NetIron MLX, and Brocade NetIron XMR devices.
Name, OID, and syntax Access Description
brcdNPNotificationSupportTa
ble
brcdIp.1.14.2.0.5 None The table objects are used by notifications defined in the
brcdNPTMMIBNotification group.
brcdNPNotificationSupportSl
otId
brcdIp.1.14.2.0.5.1.1
Syntax: Unsigned32 None Slot ID of the LP module, which uniquely identifies a line card. The
LP module must be physically present and operationally up.
brcdNPNotificationSupportDe
viceId
brcdIp.1.14.2.0.5.1.2
Syntax: Unsigned32 None The NP device ID, a number which uniquely identifies the Network
Processor within a line card in the system.
brcdNPNotificationSupportDe
scription
brcdIp.1.14.2.0.5.1.3
Syntax: DisplayString Accessible-
for-notify This object is used by the notifications to represent the range of
ports serviced by the NP device.
brcdNPNotificationSupportErr
orType
brcdIp.1.14.2.0.5.1.4
Syntax: DisplayString Accessible-
for-notify This object is used by the traps to represent type or location of the
error in the NP device.
Name, OID, and syntax Access Description
brcdNPDebugStatTable
brcdIp.1.14.2.1.1.6 None The table contains the debug statistics of Network
Processors in the line cards.
brcdNPDebugStatSlotId
brcdIp.1.14.2.1.1.6.1.1
Syntax: Unsigned32 None Slot ID of the LP module, which uniquely identifies a
line card. The LP module must be physically present
and operationally up.
brcdNPDebugStatNPDeviceId
brcdIp.1.14.2.1.1.6.1.2
Syntax: Unsigned32 None The NP device ID, a number which uniquely
identifies the Network Processor within a line card in
the system.
brcdNPDebugStatDescription
brcdIp.1.14.2.1.1.6.1.3
Syntax: DisplayString Read-only The object gives the range of ports serviced by the
brcdNPDebugStatNPDeviceId object.