Brcdtmucastqstatspriority, Brcdtmucastqstatsdescription, Brcdtmucastqstatsenquepkts – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 414: Brcdtmucastqstatsenquebytes, Brcdtmucastqstatsdequepkts, Brcdtmucastqstatsdequebytes, Brcdtmucastqstatsdiscardpkts, Brcdtmucastqstatstotalqdiscardbytes, Brcdtmucastqstatstotalqoldestdiscard pkts, Brcdtmucastqstatsoldestdiscardbytes
388
Unified IP MIB Reference
53-1003106-01
Traffic Manager unicast VOQ statistics table
39
brcdTMUcastQStatsPriority
brcdIp.1.14.2.2.3.1.4
Syntax: PriorityTC
None
Shows the priority of the packets that will be stored in
this queue. This is a 1-based index. When the
tm-max-queues is set to 4, two consecutive priorities
are stored in one unicast queue. In this case, the valid
values for this index are 1, 3, 5, and 7.
brcdTMUcastQStatsDescription
brcdIp.1.14.2.2.3.1.5
Syntax: DisplayString
Read-only
This object gives the range of ports serviced by
brcdTMUcastQStatsTMDeviceId and priorities serviced
by this queue.
brcdTMUcastQStatsEnquePkts
brcdIp.1.14.2.2.3.1.6
Syntax: Counter64
Read-only
Shows the count of all packets entering ingress queues
on the Traffic Manager.
brcdTMUcastQStatsEnqueBytes
brcdIp.1.14.2.2.3.1.7
Syntax: Counter64
Read-only
Shows the count of all bytes entering ingress queues on
the Traffic Manager.
brcdTMUcastQStatsDequePkts
brcdIp.1.14.2.2.3.1.8
Syntax: Counter64
Read-only
Shows the count of all packets dequeued from ingress
queues and forwarded to the Traffic Manager.
brcdTMUcastQStatsDequeBytes
brcdIp.1.14.2.2.3.1.9
Syntax: Counter64
Read-only
Shows the count of all bytes dequeued from ingress
queues and forwarded to the Traffic Manager.
brcdTMUcastQStatsDiscardPkts
brcdIp.1.14.2.2.3.1.10
Syntax: Counter64
Read-only
Shows the count of all packets failing to enter ingress
queues on the Traffic Manager. This may be due to the
following reasons:
•
The queue reaches its maximum depth, WRED, or
other reasons.
•
The Network Processor drops the packets due to
an unknown Layer 3 route, RPF, or segment
filtering.
brcdTMUcastQStatsTotalQDiscardBytes
brcdIp.1.14.2.2.3.1.11
Syntax: Counter64
Read-only
Shows the count of all bytes failing to enter ingress
queues on the Traffic Manager. This may be due to the
following reasons:
•
The queue reaches its maximum depth, WRED, or
other reasons.
•
The Network Processor drops the packets due to
an unknown Layer 3 route, RPF, or segment
filtering.
brcdTMUcastQStatsTotalQOldestDiscard
Pkts
brcdIp.1.14.2.2.3.1.12
Syntax: Counter64
Read-only
Shows the count of all packets entering ingress queues
on the Traffic Manager, but deleted later due to the
buffer being full.
brcdTMUcastQStatsOldestDiscardBytes
brcdIp.1.14.2.2.3.1.13
Syntax: Counter64
Read-only
Shows the count of all bytes entering ingress queues on
the Traffic Manager, but deleted later due to the buffer
being full.
brcdTMUcastQStatsWREDDroppedPkts
brcdIp.1.14.2.2.3.1.14
Syntax: Counter64
Read-only
Shows the count of all packets entering ingress queues
on the Traffic Manager but dropped due to WRED.
Name, OID, and syntax
Access
Description