Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 510)

484 Unified IP MIB Reference
53-1003106-01
BGP4 AS-Path filter table
49
BGP4 AS-Path filter table
A list of the other autonomous systems through which a route passes. BGP4 routers can use the
AS-Path to detect and eliminate routing loops.
snBgp4AggregateAddrOption
brcdIp.1.2.11.3.1.1.3
Syntax: Integer Read-only Specifies the type of aggregate address option that is being
used:
•
address(1) – Adds an address. This is the default
option.
•
asSet(2) – Causes the router to aggregate AS-Path
information for all the routes in the aggregate address into
a single AS-Path.
•
summaryOnly(3) – Prevents the router from advertising
more specific routes contained within the aggregate route.
•
suppressMap(4) – Prevents the more specific routes
contained in the specified route map from being
advertised.
•
advertiseMap(5) – Configures the router to advertise the
more specific routes in the specified route map.
•
attributeMap(6) – Configures the router to set attributes
for the aggregate routes based on the specified route
map.
snBgp4AggregateAddrMap
brcdIp.1.2.11.3.1.1.4
Syntax: OCTET STRING Read-write Specifies the name of the route map to be used if the
“snBgp4AggregateAddrOption” object is set to
suppressMap(4), advertiseMap(5), or attributeMap(6).
The value of this object is an octet string. Each character in the
address map name is represented by one octet. There can be
up to 32 octets in this object.
snBgp4AggregateAddrRowStatu
s
brcdIp.1.2.11.3.1.1.5
Syntax: Integer Read-write Controls the management of the table rows. The following
values can be written:
•
delete(3) – Deletes the row.
•
create(4) – Creates a new row.
•
modify(5) – Modifies an existing row.
If the row exists, then a SET with a value of create(4) returns a
"bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snBgp4AsPathFilterTable
brcdIp.1.2.11.4.1 None The BGP4 AS-Path filter table.
snBgp4AsPathFilterIndex
brcdIp.1.2.11.4.1.1.1
Syntax: Integer32 Read-only The table index for a filter entry.