Snl4policypriority, Snl4policyscope, Snl4policyprotocol – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 681: Snl4policyport, Snl4policyrowstatus, Layer 4 policy port access table, Snl4policyportaccesstable
Unified IP MIB Reference
655
53-1003106-01
Layer 4 policy port access table
65
Layer 4 policy port access table
The Layer 4 policy port access table lists all access policy entries. These access policies are applied
to IP interfaces (ports) that have Layer 4 IP policies configured on them.
snL4PolicyPriority
brcdIp.1.1.4.11.1.1.2
Syntax: Integer
Read-write
Shows the priority of the policy in the ServerIron.
Standalone stackable ServerIrons have the following priorities:
•
normal(0) – Normal priority
•
high(1) – High priority
•
cache(2) – Priority for cache
•
transparent(3) – Priority for transparent
Non-stackable ServerIron Layer 4 priority values:
•
level0(0)
•
level1(1)
•
level2(2)
•
level3(3)
•
level4(4)
•
level5(5)
•
level6(6)
•
level7(7)
snL4PolicyScope
brcdIp.1.1.4.11.1.1.3
Syntax: Integer
Read-write
Indicates if the policy applies to one or all ports:
•
global(0) – Applies to all ports.
•
local(1) – Applies to one port.
snL4PolicyProtocol
brcdIp.1.1.4.11.1.1.4
Syntax: Integer
Read-write
Indicates if the policy is for UDP or TCP:
•
udp(0)
•
tcp(1)
snL4PolicyPort
brcdIp.1.1.4.11.1.1.5
Syntax: Integer
Read-write
Indicates the TCP or UDP port number to which this policy will be
applied.
Valid values: 0 – 65535
snL4PolicyRowStatus
brcdIp.1.1.4.11.1.1.6
Syntax: Integer
Read-write
Controls the management of the table rows. The following values can be
written:
•
delete(3) – Deletes the row.
•
create(4) – Creates a new row.
•
modify(5) – Modifies an existing row.
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
Name, OID, and syntax
Access
Description
Name, OID, and syntax
Access
Description
snL4PolicyPortAccessTable
brcdIp.1.1.4.12.1
None
The IP Layer 4 policy interface (port) access table.