Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 469)

Unified IP MIB Reference 443
53-1003106-01
VSRP virtual router table
44
snVsrpVirRtrHoldDownIn
t
brcdIp.1.1.3.21.3.1.1.15
Syntax: Integer Read-write The amount of time a bbackup that has sent a hello packet
announcing its intent to become master waits before beginning to
forward traffic for the VRID. The hold-down interval prevents Layer 2
loops from occurring during rapid failover of VSRP.
The interval can be from 1 through 84 seconds.
Default: 2 seconds
NOTE: This object cannot be combined with the snVsrpVirRtrHelloInt
object in one SNMP set request.
snVsrpVirRtrInitTtl
brcdIp.1.1.3.21.3.1.1.16
Syntax: Integer Read-write Indicates the time-to-live (TTL) value in the hello packets. TTL is the
maximum number of hops a VSRP hello packet can traverse before
being dropped. TTL in a packet helps regulate the distance that a hello
packet can travel. It prevents the flooding of VSRP hello packets in the
network.
Valid values: 1 – 255 seconds
Default: 1 second on most devices; 2 seconds in the NetIron devices
snVsrpVirRtrIncPortList
brcdIp.1.1.3.21.3.1.1.17
Syntax: OCTET STRING Read-write Groups all free ports of a VLAN into their control ports.
snVsrpVirRtrSave
brcdIp.1.1.3.21.3.1.1.18
Syntax: Integer Read-write Sets VSRP to save current parameters value:
•
disabled(0)
•
enabled(1)
Default: disabled(0)
snVrrpVirRtrBackupInt
brcdIp.1.1.3.21.3.1.1.19
Syntax: Integer Read-write Indicates the time interval when backup routers send hello message
advertisements.
Valid values: 60 – 3600 seconds
Default: 60 seconds
snVsrpVirRtrRowStatus
brcdIp.1.1.3.21.3.1.1.20
Syntax: Integer Read-write Controls the management of the table rows. The following values can
be written:
•
delete(3) – Delete the row.
•
create(4) – Create a new row.
•
modify(5) – Modify an existing row.
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
snVsrpVirRtrRxArpPktDr
opCnts
brcdIp.1.1.3.21.3.1.1.21
Syntax: Counter32 Read-only The received VSRP ARP packet drop counts .
snVsrpVirRtrRxIpPktDro
pCnts
brcdIp.1.1.3.21.3.1.1.22
Syntax: Counter32 Read-only The received VSRP IP packet drop counts .
snVsrpVirRtrRxPortMism
atchCnts
brcdIp.1.1.3.21.3.1.1.23
Syntax: Counter32 Read-only The received VSRP port mismatching counts .
Name, OID, and syntax Access Description