Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 541)

Unified IP MIB Reference 515
53-1003106-01
OSPF interface configuration tables
50
snOspfIf2AdminStat
brcdIp.1.2.4.4.2.1.3
Syntax: Integer Read-write Indicates if neighbor relationships may be formed on this
interface:
•
disabled(0) – The interface is external to OSPF.
•
enabled(1) – Neighbor relationships may be formed on the
interface, which will be advertised as an internal route to
an area.
Default: enabled(1)
snOspfIf2RtrPriority
brcdIp.1.2.4.4.2.1.4
Syntax: DesignatedRouterPriority Read-write Specifies the priority of this interface. This object is used in the
designated router election algorithm for multi-access networks.
Valid values: 0 – 255. A value of 0 signifies that the router is not
eligible to become the designated router on this particular
network.
If two or more routers have the same priority value, then the
router with the highest router ID becomes the designated router.
The router with the next highest router ID becomes the backup
designated router.
snOspfIf2TransitDelay
brcdIp.1.2.4.4.2.1.5
Syntax: UpToMaxAge Read-write Shows the time it takes to transmit link-state update packets on
this interface.
Valid values: 0 – 3600 seconds
Default: 1 second
snOspfIf2RetransInterval
brcdIp.1.2.4.4.2.1.6
Syntax: UpToMaxAge Read-write Specifies the number of seconds between link-state
advertisement retransmissions, for adjacencies belonging to
this interface. This value is also used when retransmitting
database description and link-state request packets.
Valid values: 0 – 3600 seconds
Default: 5 seconds
snOspfIf2HelloInterval
brcdIp.1.2.4.4.2.1.7
Syntax: HelloRange Read-write Specifies the number of seconds that router waits before it
sends the next hello packet on this interface. This value must be
the same for all routers attached to a common network.
Valid values: 1 – 65535 seconds (up to ‘FFFF’h)
Default: 10 seconds
snOspfIf2RtrDeadInterval
brcdIp.1.2.4.4.2.1.8
Syntax: PositiveInteger Read-write Specifies the number of seconds that neighbor routers wait for a
router’s hello packets before they declare that the router is
down. This should be a multiple of the hello interval. This value
must be the same for all routers attached to a common network.
Valid values: 1 – 2147483647 seconds
Default: 40 seconds
snOspfIf2AuthType
brcdIp.1.2.4.4.2.1.9
Syntax: Integer Read-write Specifies the authentication type for an interface.
Valid values:
•
none(0)
•
simplePassword(1)
•
md5(2)
•
reserved for specification by IANA(> 2)
Additional authentication types may be assigned locally on a
per-interface basis. The value of this object can be up to 255.
Default: none(0)
Name, OID, and syntax Access Description