Supported on fastiron devices – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 32
6
Unified IP MIB Reference
53-1003106-01
Supported on FastIron devices
2
•
RFC 4444: Management Information Base for Intermediate System to Intermediate System
(IS-IS) 66
•
RFC 4807: IPsec Security Policy Database Configuration MIB. . . . . . . . . . . 68
•
•
This section summarizes the standard objects that are supported in the Unified IP MIB. It does not
document all the supported standard objects, but presents those standard MIBs that are not fully
supported.
For example, although RFC 1493 is supported in the Unified IP MIB, some groups and tables in that
MIB are not supported.
Supported on FastIron devices
FastIron devices support the following RFCs:
•
2819 — Remote Network Monitoring Management Information Base
•
2863 –The Interfaces Group MIB
•
3411 – SNMP Framework MIB
NOTE
In RFC 3411, the snmpEngineBoots object supports the maximum value 9999.
•
3412 – Message Processing and Dispatching (MPD) for the SNMP MIB
•
3413 – SNMP Target MIB
•
3414 – User-Security Model for SNMPv3 MIB
•
3415 – View-based Access Control Model for SNMP MIB
NOTE
The GET/SET operation is not supported on vacmViewTreeFamilyTable, vacmAccessTable, and
vacmSecurityToGroupTable of RFC 3415.
•
4188 – Definitions of Managed Objects for Bridges
•
4273 – Definitions of Managed Objects for BGP-4
FastIron X Series IPv6 devices support the following standard MIBs:
•
2452 – IP Version 6 Management Information Base for the Transmission Control Protocol
•
2454 – IP Version 6 Management Information Base for the User Datagram Protocol
•
2465 – Management Information Base for IP Version 6: Textual Conventions and General
Group
NOTE
RFC 2465 MIB support on FastIron X Series IPv6 devices is limited to ipv6NetToMediaTable
and ipv6AddrTable only. The SET operation is not supported on ipv6IfDescr object of
ipv6IfTable.
•
2466 – Management Information Base for IP Version 6: ICMPv6 Group
•
2932 – IPv4 Multicast Routing MIB