Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 82)

56 Unified IP MIB Reference
53-1003106-01
draft-ietf-idr-bgp4-mibv2-12 MIB
2
BGP4v2 per-peer event times table
The following table contains the BGP4v2 per-peer event times-related objects.
NOTE
The following table is not supported on the Brocade NetIron CES 2000 series BASE Packages device.
bgp4V2PeerLastErrorReceivedText
brcdIp.3.5.1.1.3.1.4
Syntax: SnmpAdminString Read-only Specifies the implementation-specific explanation of the error
reported.
bgp4V2PeerLastErrorReceivedData
brcdIp.3.5.1.1.3.1.5
Syntax: Octet String
NOTE: This object is not supported
on Brocade NetIron MLX,
Brocade MLXe, Brocade
NetIron XMR, Brocade
NetIron CES, and Brocade
NetIron CER series devices
Read-only Specifies the data of the last error code received by the peer.
As per RFC 2578, some implementations have limitations
dealing with Octet Strings that are larger than 255. So, the
data is truncated.
bgp4V2PeerLastErrorCodeSent
brcdIp.3.5.1.1.3.1.6
Syntax: Unsigned32 Read-only Specifies the last error code sent to the peer through a
notification message on the connection. The field is zero(0), if
no error occurs.
bgp4V2PeerLastErrorSubCodeSent
brcdIp.3.5.1.1.3.1.7
Syntax: Unsigned32 Read-only Specifies the last error subcode sent to the peer through a
notification message on the connection. The field is zero(0), if
no error occurs.
bgp4V2PeerLastErrorSentTime
brcdIp.3.5.1.1.3.1.8
Syntax: TimeStamp Read-only Indicates the time stamp when the last notification is sent to
the peer.
bgp4V2PeerLastErrorSentText
brcdIp.3.5.1.1.3.1.9
Syntax: SnmpAdminString Read-only Specifies the implementation-specific explanation of the error
reported.
bgp4V2PeerLastErrorSentData
brcdIp.3.5.1.1.3.1.10
Syntax: Octet String
NOTE: This object is not supported
on Brocade NetIron MLX,
Brocade MLXe, Brocade
NetIron XMR, Brocade
NetIron CES, and Brocade
NetIron CER series devices
Read-only Specifies the data of the last error code sent to the peer.
As per RFC 2578, some implementations have limitations
dealing with Octet Strings that are larger than 255. So, the
data is truncated.
Name, OID, and syntax Access Description