Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 506)

480 Unified IP MIB Reference
53-1003106-01
BGP4 general variables
49
snBgp4GenMaxAggregateAddresses
brcdIp.1.2.11.1.20
Syntax: Integer32 Read-only Shows the maximum number of configured BGP4 aggregate
addresses.
snBgp4GenMaxAsPathFilters
brcdIp.1.2.11.1.21
Syntax: Integer32 Read-only Shows the maximum number of configured BGP4 AS-Path
filters.
snBgp4GenMaxCommunityFilters
brcdIp.1.2.11.1.22
Syntax: Integer32 Read-only Shows the maximum number of configured BGP4 community
filters.
snBgp4GenMaxNetworks
brcdIp.1.2.11.1.23
Syntax: Integer32 Read-only Shows the maximum number of configured BGP4 networks.
snBgp4GenMaxRouteMapFilters
brcdIp.1.2.11.1.24
Syntax: Integer32 Read-only Shows the maximum number of configured BGP4 route map
filters.
snBgp4GenNeighPrefixMinValue
brcdIp.1.2.11.1.25
Syntax: Integer32 Read-only Shows the minimum configured value of the BGP4 neighbor
prefix.
snBgp4GenOperNeighbors
brcdIp.1.2.11.1.26 Read-only Shows the current operational maximum number of
neighbors configured for a BGP group.
snBgp4GenOperRoutes
brcdIp.1.2.11.1.27
Syntax: Integer32 Read-only Shows the current operational number of routes.
snBgp4GenLocalAs
brcdIp.1.2.11.1.28
Syntax: Integer Read-only Shows the BGP4 local AS number.
Valid values: 1 - 65536
snBgp4GenRoutesInstalled
brcdIp.1.2.11.1.29
Syntax: Integer32 Read-only Shows the BGP4 installed routes.
snBgp4GenAsPathInstalled
brcdIp.1.2.11.1.30
Syntax: Integer32 Read-only Shows the BGP4 installed AS-Path.
snBgp4ExternalDistance
brcdIp.1.2.11.1.31
Syntax: Integer Read-write Determines the administrative distance for BGP external
routes.
Default: 200
snBgp4InternalDistance
brcdIp.1.2.11.1.32
Syntax: Integer Read-write Determines the administrative distance for BGP internal
routes.
Default: 200
snBgp4LocalDistance
brcdIp.1.2.11.1.33
Syntax: Integer Read-write Determines the administrative distance for BGP local routes.
Default: 200
snBgp4OperNumOfAttributes
brcdIp.1.2.11.1.34
Syntax: Integer32 Read-only Shows the operational number of attribute entries.
Name, OID, and syntax Access Description