Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 335)

Unified IP MIB Reference 309
53-1003106-01
Port VLAN configuration table
23
snVLanByPortCfgStpMode
brcdIp.1.1.3.2.7.1.3
Syntax: Integer Read-write Indicates whether or not Spanning Tree Protocol (STP) is enabled:
•
disabled(0)
•
enabled(1)
The following values are supported on FastIron SuperX software
releases:
•
disabled(0)
•
enableStp(1)
•
enableRstp(2)
snVLanByPortCfgStpPriority
brcdIp.1.1.3.2.7.1.4
Syntax: Integer Read-write Shows the value of the dot1dStpPriority, which is the first two octets of
the STP or RSTP bridge ID. The STP and RSTP bridge IDs are eight
octets long. This object contains the writable portion of the bridge ID.
The last six octets are contained in the dot1dBaseBridgeAddress of
the
“snVLanByPortBaseBridgeAddress” object.
Valid values: 1 – 65535
snVLanByPortCfgStpGroup
MaxAge
brcdIp.1.1.3.2.7.1.5
Syntax: Integer32 Read-write Shows the value of dot1dStpBridgeMaxAge, which is the last six octets
or the STP or RSTP bridge ID. All bridges use this object for MaxAge
when this bridge is acting as the root.
NOTE: 802.1D-1990 specifies that the range for this parameter is
related to the value of dot1dStpBridgeHelloTime in the
“snVLanByPortStpGroupHelloTime” object.
The granularity of this timer is specified by 802.1D-1990 to be
one second. An agent may return a bad value error if a set is
attempted to a value which is not a whole number of seconds.
(Refer to RFC 1493 Bridge MIB.)
Valid values: 6 – 40
snVLanByPortCfgStpGroup
HelloTime
brcdIp.1.1.3.2.7.1.6
Syntax: Integer Read-write Shows the value of dot1dStpBridgeHelloTime, which is the value used
by all bridges when this bridge is acting as the root.
NOTE: The granularity of this timer is specified by 802.1D-1990 to be
one second. An agent may return a bad Value error if a set is
attempted to a value which is not a whole number of seconds.
(Refer to RFC 1493 Bridge MIB.)
Valid values: 1 – 10
snVLanByPortCfgStpGroupF
orwardDelay
brcdIp.1.1.3.2.7.1.7
Syntax: Integer32 Read-write Shows the value of dot1dStpBridgeForwardDelay, which is the value
used by all bridges for ForwardDelay when this bridge is acting as the
root.
NOTE: 802.1D-1990 specifies that the range for this parameter is
related to the value of dot1dStpBridgeMaxAge, which is in the
“snVLanByPortStpGroupMaxAge” object.
The granularity of this timer is specified by 802.1D-1990 to be
one second. An agent may return a bad value error if a set is
attempted to a value which is not a whole number of seconds.
(Refer to RFC 1493 Bridge MIB.)
Valid values: 2 – 30
snVLanByPortCfgBaseNum
Ports
brcdIp.1.1.3.2.7.1.8
Syntax: Integer32 Read-only The number of ports controlled by this bridging entity.
Name, OID, and syntax Access Description