Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 722)

696 Unified IP MIB Reference
53-1003106-01
Proprietary traps
67
NP buffer error notifications
The following table contains Network Processor (NP) buffer error notifications that are supported
only on the Brocade NetIron CES and Brocade NetIron CER series devices.
Trap name and number Varbinds Severity Description and trap message
snTrapTMLoggingStart
brcdIp.0.1015 snAgGblTrapMessage Informational Traffic Manager logging started, triggerred
by an event.
snTrapTMLoggingStop
brcdIp.0.1016 snAgGblTrapMessage Informational Traffic Manager logging stopped because
the storage is full.
snTrapTMLoggingRestart
brcdIp.0.1017 snAgGblTrapMessage Informational Traffic Manager logging restarted after the
log was cleared.
snTrapTMRecoverySlotRes
et
brcdIp.0.1019 snAgGblTrapMessage Informational This trap is generated when the Traffic
Manager recovery slot reset is triggered.
snTrapTMEgressDataError
brcdIp.0.1020 snAgGblTrapMessage Major This trap is generated when the system
detects egress data errors on the Traffic
Manager.
Sample trap message:
Health Monitoring : TM Egress
data errors detected on LP
/TM
snTrapSFMLinkDown
brcdIp.0.1100 snAgGblTrapMessage Warning A link from the LP Traffic Manager to an
SFM Fabric Element is down.
Sample trap message:
Fabric Monitoring Link Down :
SFM /FE /Link ,
LP /TM
snTrapSFMLinkUp
brcdIp.0.1101 snAgGblTrapMessage Informational A link from the LP Traffic Manager to an
SFM Fabric Element is up.
Sample trap message:
Fabric Monitoring Link Up :
SFM /FE /Link ,
LP /TM
snTrapSFMAccessError
brcdIp.0.1102 snAgGblTrapMessage Major This trap is generated when the system
fails to access an SFM Fabric Element.
Sample trap message:
Health Monitoring: FE
accessfailure on SFM /FE