Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 576)

550 Unified IP MIB Reference
53-1003106-01
Global DVMRP objects
53
snDvmrpGenerationId
brcdIp.1.2.5.1.3
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
XMR, Brocade
NetIron MLX,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-only Shows the generation identifier for the routing process. This is used by
neighboring Layer 3 Switches to determine if pruning information
should be resent.
snDvmrpProbeInterval
brcdIp.1.2.5.1.4
Syntax: Integer Read-write Defines how often neighbor probe messages are sent to the
ALL-DVMRP-ROUTERS IP multicast group address. A Layer 3 Switch’s
probe message lists those neighbor DVMRP routers from which it has
received probes.
Valid values: 5 – 30 seconds
Default: 10 seconds
snDvmrpReportInterval
brcdIp.1.2.5.1.5
Syntax: Integer Read-write Defines how often Layer 3 Switches propagate their complete routing
tables to other DVMRP neighbor routers.
Valid values: 10 –2000 seconds
Default: 60 seconds
snDvmrpTriggerInterval
brcdIp.1.2.5.1.6
Syntax: Integer Read-write Defines how often trigger updates, which reflect changes in the
network topology, are sent. For example, changes in a network
topology, including router up or down, or changes in the metric, would
cause trigger updates to be sent.
Valid values: 5 –30 seconds
Default: 5 seconds
snDvmrpNeighborRouterTi
meout
brcdIp.1.2.5.1.7
Syntax: Integer Read-write Specifies how long a router waits before it determines that an attached
DVMRP neighbor router is down.
Valid values: 40 – 8000 seconds
Default: 180 seconds
snDvmrpRouteExpireTime
brcdIp.1.2.5.1.8
Syntax: Integer Read-write Defines how long a route is considered valid in the absence of the next
route update.
Valid values: 20 – 4000 seconds
Default: 200 seconds
snDvmrpRouteDiscardTim
e
brcdIp.1.2.5.1.9
Syntax: Integer Read-write Defines how long a router waits before it deletes a route.
Valid values: 40 – 8000 seconds
Default: 340 seconds
snDvmrpPruneAge
brcdIp.1.2.5.1.10
Syntax: Integer Read-write Defines how long a prune state will remain in effect for a source-routed
multicast tree. After the prune age period expires, flooding will resume.
Valid values: 20 – 3600 seconds
Default: 180 seconds
Name, OID, and syntax Access Description