Snswifinfomediatype, Snswifinfoconnectortype, Snswifinfoadminstatus – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 223: Snswifinfolinkstatus
Unified IP MIB Reference
197
53-1003106-01
Switch port information
8
snSwIfInfoSpeed
(continued)
•
s622M(8) – OC12 - 622 Mbits per second. (Brocade NetIron XMR
router, Brocade MLX router, and Brocade MLXe)
•
s2488M(9) – OC48 - 2.488 Gbits per second. (Brocade NetIron
XMR router, Brocade MLX router, and Brocade MLXe)
•
s9953M(10) – OC192 - 9.953 Gbits per second. (Brocade NetIron
XMR router, Brocade MLX router, and Brocade MLXe)
•
s16G(11) - 16 Gbits per second.
•
s40G(13) - 40 Gbits per second.
The port media type (expansion or regular) and port link type (trunk or
feeder) determine whether this object can be written and the valid values
for this object. It is not allowed to change speed for trunk ports. For
expansion ports, all of the above speeds can be set; however, the value
of this parameter may be automatically set whenever the expansion port
is connected, for example, in the case of a cascade-connecting device.
snSwIfInfoMediaType
brcdIp.1.1.3.3.5.1.8
Syntax: Integer
Read-only
Shows the media type for the port:
•
other(1) – Other or unknown media.
•
m100BaseTX(2) – 100 Mbits per second copper.
•
m100BaseFX(3) – 100 Mbits per second fiber.
•
m1000BaseFX(4) – 1 Gbits per second fiber.
•
mT3(5) – 45 Mbits per second (T3).
•
m155ATM(6) – 155 Mbits per second (ATM).
•
m1000BaseTX(7) – 1 Gbits per second copper.
•
m622ATM(8) – 622 Mbits per second (ATM).
•
m155POS(9) – 155 Mbits per second (POS).
•
m622POS(10) – 622 Mbits per second (POS).
•
m2488POS(11) – 2488 Mbits per second (POS).
•
m10000BaseFX(12) – 10 Gbits per second fiber.
•
m9953POS(13) – 9953 Mbits per second (POS). (Brocade NetIron
XMR router, Brocade MLX router, and Brocade MLXe)
•
m16GStacking(14) - 16 Gbits per second fiber.
•
m100GBaseFX(15) - 100 Gbits per second fiber.
•
m40GStacking(16) - 40 Gbits per second fiber.
•
m40GBaseFX(17) - 40 Gbits per second fiber.
snSwIfInfoConnectorType
brcdIp.1.1.3.3.5.1.9
Syntax: Integer
Read-only
Shows the type of connector that the port offers:
•
other(1) – Other or unknown connector.
•
copper(2) – Copper connector.
•
fiber(3) – Fiber connector. This describes the physical connector
type.
snSwIfInfoAdminStatus
brcdIp.1.1.3.3.5.1.10
Syntax: Integer
Read-write
Shows the desired state of all ports:
•
up(1) – Ready to pass packets
•
down(2)
•
testing(3) – No operational packets can be passed (same as
ifAdminStatus in MIB-II)
snSwIfInfoLinkStatus
brcdIp.1.1.3.3.5.1.11
Syntax: Integer
Read-only
Shows the current operational state of the interface:
•
up(1) – Ready to pass packets
•
down(2)
•
testing(3) – No operational packets can be passed (same as
ifAdminStatus in MIB-II)
Name, OID, and syntax
Access
Description