Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 756)

730 Unified IP MIB Reference
53-1003106-01
General traps for the Brocade NetIron devices
67
snMplsLspUp
brcdIp.0.1010 mplsLspName,
mplsLspPathName Informational The specified LSP is up. The current active
path for the LSP is the value of
mplsLspPathName.
NOTE: Do not use this trap if you are using
the snTrapTMLogging traps.
Sample trap message:
Name of the notification
received: snMplsLspUp
Foundry-MPLS-MIB:mplsLspName.2
.1 : (mlx8tobottomcer)
Syntax:
SNMPv2-TC:DisplayString,
Instance IDs: (2 1)
Foundry-MPLS-MIB:mplsLspPathNa
me.2.1 : () Syntax:
SNMPv2-TC:DisplayString,
Instance IDs: (2 1)
snMplsLspDown
brcdIp.0.1011 mplsLspName,
mplsLspPathName Informational The specified LSP is down, because the
current active path specified by the
mplsLSPPathName went down.
NOTE: Do not use this trap if you are using
the snTrapTMLogging traps.
Sample trap message:
Name of the notification
received: snMplsLspDown
Foundry-MPLS-MIB:mplsLspName.2
.1 : (mlx8tobottomcer)
Syntax:
SNMPv2-TC:DisplayString,
Instance IDs: (2 1)
Foundry-MPLS-MIB:mplsLspPathNa
me.2.1 : () Syntax:
SNMPv2-TC:DisplayString,
Instance IDs: (2 1)
snMplsLspChange
brcdIp.0.1012 mplsLspName,
mplsLspPathName Informational The specified LSP has switched traffic to the
new active path ”toLspPath”. The LSP
maintains an up state before and after the
switchover.
NOTE: Do not use this trap if you are using
the snTrapTMLogging traps.
Sample trap message:
Name of the notification
received: snMplsLspChange
Foundry-MPLS-MIB:mplsLspName.2
.1 : (mlx8tobottomcer)
Syntax:
SNMPv2-TC:DisplayString,
Instance IDs: (2 1)
Foundry-MPLS-MIB:mplsLspPathNa
me.2.1 : (testpath1) Syntax:
SNMPv2-TC:DisplayString,
Instance IDs: (2 1)
Trap name and number Varbinds Severity Description and trap message