Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 488)

462 Unified IP MIB Reference
53-1003106-01
IP interface counter table
46
IP interface counter table
The following MIB objects are supported on the Brocade NetIron devices.
snRtIpPortIfDirBcastFwd
brcdIp.1.2.2.20.1.5
Syntax: RtrStatus Read-Write Enables or disables directed broadcast forwarding on the port.
snRtIpPortConfigIfDonor
Interface
brcdIp.1.2.2.20.1.6
Syntax:
InterfaceIndexOrZero Read-only Returns the ifIndex of the donor interface, if the interface is configured
as an unnumbered interface. Returns its own ifIndex value, if the
interface is configured as a donor interface. Otherwise, returns 0.
Name, OID, and syntax Access Description
Name, OID, and Syntax Access Description
agIpPortCounterTable
brcdIp.1.2.2.21 None IP port counter table to display IP traffic statistics. At present, the
system supports only IP statistics for Ethernet ports.
agIpPortCounterIpVersion
brcdIp.1.2.2.21.1.1
Syntax: IpAddress None The version of IP for which this counter entry is returned. This table
supports ipv4(1) and ipv6(2) enumerations.
agIpPortCounterRxPacket
brcdIp.1.2.2.21.1.2
Syntax: Counter64 Read-only Total IP packets received on a given interface.
agIpPortCounterRxOctet
brcdIp.1.2.2.21.1.3
Syntax: Counter64 Read-only Total IP octets received on a given interface.
agIpPortCounterTxPacket
brcdIp.1.2.2.21.1.4
Syntax: Counter64 Read-only Total IP packets transmitted from a given interface.
agIpPortCounterTxOctet
brcdIp.1.2.2.21.1.5
Syntax: Counter64 Read-only Total IP octets transmitted from a given interface.