Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 752)

726 Unified IP MIB Reference
53-1003106-01
Proprietary traps
67
Trap receiver table (FastIron X series IPv6 devices)
The following table allows you to configure trap receivers on FastIron X series IPv6 devices.
NOTE
The following table is not supported on the Brocade NetIron MLX, Brocade MLXe, Brocade NetIron
XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
Trap name and number Varbinds Severity Description
snTrapLicenseAdded
brcdIp.0.187 snAgGblTrapMessage Notifica
tion
The SNMP trap is generated when a new license
is added to the system.
snTrapLicenseRemoved
brcdIp.0.188 snAgGblTrapMessage Notifica
tion
The SNMP trap is generated when a license is
removed from the system.
snTrapLicenseExpires
brcdIp.0.189 snAgGblTrapMessage Notifica
tion
The SNMP trap that is generated when a trial
license is about to expire. This trap is generated
daily for the last 3 days of the license, and every
2 hours on the day when the license expires.
snTrapLicenseExpired
brcdIp.0.190 snAgGblTrapMessage Notifica
tion
The SNMP trap that is generated when a trial
license has expired.
Trap name and number Access Description
fdryTrapReceiverTable
brcdIp.1.1.10.1.1.1 None The trap receiver table.
fdryTrapReceiverIndex
brcdIp.1.1.10.1.1.1.1.1
Syntax: Unsigned32 None The index to the trap receiver table.
fdryTrapReceiverAddrType
brcdIp.1.1.10.1.1.1.1.2
Syntax: InetAddressType Read-create The IP address type:
•
ipv4(1)
•
ipv6(2)
Default: ipv4(1)
fdryTrapReceiverAddr
brcdIp.1.1.10.1.1.1.1.3
Syntax: InetAddress Read-create The IP address of the SNMP manager that will receive the trap.
fdryTrapReceiverCommunityOrS
ecurityName
brcdIp.1.1.10.1.1.1.1.4
Syntax: OCTET STRING Read-create The community string to use to access the trap receiver. This
object can have up to 32 octets. In the case of the USM
(SNMPv3) security model, this object is used to provide the
security name.
fdryTrapReceiverUDPPort
brcdIp.1.1.10.1.1.1.1.5
Syntax: Integer32 Read-create The UPD port number of the trap receiver.
Valid value: 0 – 65535
Default: 162
fdryTrapReceiverSecurityModel
brcdIp.1.1.10.1.1.1.1.6
Syntax: SecurityModel Read-create The version of trap format to be used.
Default: v1