Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 93)

Unified IP MIB Reference 67
53-1003106-01
RFC 4444: Management Information Base for Intermediate System to Intermediate System (IS-IS)
2
Notifications
IS-IS notification is enabled by default. To disable notification, issue the no snmp-server enable
traps isis command at the device CLI. Use snmp-server enable traps isis command to re-enable
notification.
Table 4 lists the notifications in RFC 4444 that are supported on the Brocade NetIron XMR,
Brocade NetIron MLX, Brocade MLXe, Brocade NetIron CES, and Brocade NetIron CER series
devices.
NOTE
Only one IS-IS trap is generated for each notification type within a 60-second (1 minute) period. For
example, if several authentication failure notification types occur within a 60-second period, only
one trap is generated for the authentication failure notification type. This duration is different from
what is specified in RFC 4444.
isisSummAddrTable 1.3.6.1.2.1.138.1.1.4 -
isisRedistributeAddrTable 1.3.6.1.2.1.138.1.1.5 -
isisRouterTable 1.3.6.1.2.1.138.1.1.6 -
isisSysLevelTable 1.3.6.1.2.1.138.1.2.1 -
isisCircTable 1.3.6.1.2.1.138.1.3.2 The following objects from this table
are not supported:
•
isisCircMeshGroupEnabled will
return INACTIVE.
•
isisCircMeshGroup will return
zero (0).
Also, the object isisCirc3WayEnabled
is always ON for Pt 2 Pt.
isisCircLevelTable 1.3.6.1.2.1.138.1.4.1 -
isisSystemCounterTable 1.3.6.1.2.1.138.1.5.1 -
isisCircuitCounterTable 1.3.6.1.2.1.138.1.5.2 -
isisPacketCounterTable 1.3.6.1.2.1.138.1.5.3 -
isisIsAdjTable 1.3.6.1.2.1.138.1.6.1 -
isisIsAdjAreaAddrTable 1.3.6.1.2.1.138.1.6.2 -
isisIsAdjIPAddrTable 1.3.6.1.2.1.138.1.6.3 -
isisIsAdjProtSuppTable 1.3.6.1.2.1.138.1.6.4 -
isisIPRATable 1.3.6.1.2.1.138.1.8.1 -
isisLSPSummaryTable 1.3.6.1.2.1.138.1.9.1 -
isisLSPTLVTable 1.3.6.1.2.1.138.1.9.2 -
isisNOTIFICATION 1.3.6.1.2.1.138.1.10 -
Object group name Object identifier Comments