Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 700)

674 Unified IP MIB Reference
53-1003106-01
Virtual server port history table
65
snL4VirtualServerPortHistoryInter
valStart
brcdIp.1.1.4.28.8.1.3
Syntax: Time ticks Read-only The value of sysUpTime at the start of the interval used to
measure data samples.
If the probe keeps track of the time of day, set the data sampling
to start at the beginning of the next hour.
NOTE: Following this rule may require the probe to delay the
collection of the first sample for an entry, because each
sample must be of the same interval. Also, data for the
sample that is currently being collected is not accessible
in this table until the end of its interval.
snL4VirtualServerPortHistoryRece
ivePkts
brcdIp.1.1.4.28.8.1.4
Syntax: Counter Read-only Shows the number of packets the ServerIron has received from
the virtual server port.
snL4VirtualServerPortHistoryTrans
mitPkts
brcdIp.1.1.4.28.8.1.5
Syntax: Counter Read-only Shows the number of packets the ServerIron sent to the virtual
server.
snL4VirtualServerPortHistoryTotal
Connections
brcdIp.1.1.4.28.8.1.6
Syntax: Counter Read-only Shows the total number of client connections on the virtual
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.
snL4VirtualServerPortHistoryCurC
onnections
brcdIp.1.1.4.28.8.1.7
Syntax: Integer Read-only Shows the number of client connections currently on the virtual
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.
snL4VirtualServerPortHistoryPeak
Connections
brcdIp.1.1.4.28.8.1.8
Syntax: Integer Read-only Shows the highest number of client connections on the virtual
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.
Name, OID, and syntax Access Description