Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 53)

Unified IP MIB Reference 27
53-1003106-01
RFC 2932: IPv4 Multicast Routing MIB
2
IP multicast scalar
ipMRouteTable (IP multicast route table)
Use the show ip pim mcache CLI command to display the information for the IP multicast route
table.
Use the show ip route and show ip mroute commands to display the route information
(ipMRouteRtAddress, ipMRouteRtMask, and ipMRouteRtType).
The SET request is not supported for this table.
Object Object identifier Supported?
ipMRouteEnable 1.3.6.1.2.1.83.1.1.1 Yes. Use either the [no] ip multicast-routing or
[no] router pim command to configure IP multicast
routing on the router.
ipMRouteEntryCount 1.3.6.1.2.1.83.1.1.7 Yes. Use the show ip pim mcache [count] command
to display the the number of rows in the
ipMRouteTable.
Object Object identifier Supported?
ipMRouteGroup 1.3.6.1.2.1.83.1.1.2.1.1 Yes
ipMRouteSource 1.3.6.1.2.1.83.1.1.2.1.2 Yes
ipMRouteSourceMask 1.3.6.1.2.1.83.1.1.2.1.3 Yes
ipMRouteUpstreamNeighbor 1.3.6.1.2.1.83.1.1.2.1.4 Yes, but read-only.
ipMRouteInIfIndex 1.3.6.1.2.1.83.1.1.2.1.5 Yes, but read-only.
ipMRouteUpTime 1.3.6.1.2.1.83.1.1.2.1.6 Yes, but read-only.
ipMRouteExpiryTime 1.3.6.1.2.1.83.1.1.2.1.7 Yes, but read-only.
ipMRoutePkts 1.3.6.1.2.1.83.1.1.2.1.8 Yes, but read-only.
ipMRouteDifferentInIfPackets 1.3.6.1.2.1.83.1.1.2.1.9 No
NOTE: This object is not supported
on the Brocade MLXe,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
ipMRouteOctets 1.3.6.1.2.1.83.1.1.2.1.10 No
NOTE: This object is not supported
on the Brocade MLXe,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
ipMRouteProtocol 1.3.6.1.2.1.83.1.1.2.1.11 Yes, but read-only.
ipMRouteRtProto 1.3.6.1.2.1.83.1.1.2.1.12 Yes, but read-only.
ipMRouteRtAddress 1.3.6.1.2.1.83.1.1.2.1.13 Yes, but read-only.