Snbgp4routemapsetdampensupp ress, Snbgp4routemapsetdampenmaxs uppress, Bgp4 neighbor operational status table – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 525: Snbgp4neighoperstatustable, Snbgp4neighoperstatusindex, Snbgp4neighoperstatusip, Snbgp4neighoperstatusremoteas, Snbgp4neighoperstatusbgptype
Unified IP MIB Reference
499
53-1003106-01
BGP4 neighbor operational status table
49
BGP4 neighbor operational status table
The BGP4 neighbor operational status table shows the state of a neighbor and statistics about the
messages sent and received.
snBgp4RouteMapSetDampenSupp
ress
brcdIp.1.2.11.14.1.1.19
Syntax: Integer
Read-write
The BGP4 route map dampening suppress.
snBgp4RouteMapSetDampenMaxS
uppress
brcdIp.1.2.11.14.1.1.20
Syntax: Integer
Read-write
The BGP4 route map dampening maximum suppress time.
Name, OID, and syntax
Access
Description
Name, OID, and syntax
Access
Description
snBgp4NeighOperStatusTable
brcdIp.1.2.11.15.1
None
The BGP4 neighbor operational status table.
snBgp4NeighOperStatusIndex
brcdIp.1.2.11.15.1.1.1
Syntax: Integer32
Read-only
The index for the entry. Each entry represents a neighbor.
snBgp4NeighOperStatusIp
brcdIp.1.2.11.15.1.1.2
Syntax: IpAddress
Read-only
Shows the IP address of the neighbor.
snBgp4NeighOperStatusRemoteAs
brcdIp.1.2.11.15.1.1.3
Syntax: Integer32
Read-only
Shows the AS that the neighbor is in.
snBgp4NeighOperStatusBgpType
brcdIp.1.2.11.15.1.1.4
Syntax: Integer
Read-only
Shows the type of BGP used by this entry:
•
ebgp(0) – The neighbor is in another AS.
•
ibgp(1) – The neighbor is in the same AS.