Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 318)

292 Unified IP MIB Reference
53-1003106-01
Global system logging group objects
21
snAgSysLogGblCriticalLevel
brcdIp.1.1.2.6.1.4
Syntax: Integer32 Read-write Filters and identifies the events that will be logged in the logging
buffer. This object consists of 32 bits. The following shows the
meaning of each bit:
Bit Meaning
8- 31 Reserved
7
Warning (warning conditions)
6 Notification (normal but significant conditions)
5 Informational (informational messages)
4 Error (error conditions)
2 Debugging (debugging messages)
1 Critical (critical conditions). Setting this bit to 1 tells the
logging buffer to accept the corresponding event.
0 Alert (immediate action needed). Setting this bit to 0
makes the logging buffer reject the corresponding event.
Default: 255
snAgSysLogGblLoggedCount
brcdIp.1.1.2.6.1.5
Syntax: Counter32 Read-only Shows the number events logged in the system logging buffer.
snAgSysLogGblDroppedCount
brcdIp.1.1.2.6.1.6
Syntax: Counter32 Read-only Shows the number of events dropped from the system logging
buffer.
snAgSysLogGblFlushedCount
brcdIp.1.1.2.6.1.7
Syntax: Counter32 Read-only Shows the number of times that the system logging buffer was
cleared.
snAgSysLogGblOverrunCount
brcdIp.1.1.2.6.1.8
Syntax: Counter32 Read-only Shows the number of times that the system logging buffer has
wrapped around.
snAgSysLogGblServer
brcdIp.1.1.2.6.1.9
Syntax: IpAddress
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron XMR,
Brocade NetIron MLX,
Brocade NetIron CES,
and Brocade NetIron
CER series devices.
Read-write IP address of syslog server.
Name, OID, and syntax Access Description