Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 726)

700 Unified IP MIB Reference
53-1003106-01
Proprietary traps
67
MEF Service OAM notifications
The following are the Metro Ethernet Forum (MEF) Service OAM (SOAM) traps.
NOTE
The following traps are supported on the Brocade NetIron MLX, Brocade MLXe, Brocade NetIron
XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
VRRP traps
The following table contains VRRP trap that can be used only by the devices that support VRRP.
Trap name and
number Supported? Varbind Description
mefSoamDmSe
ssionStartStop
1.3.6.1.4.1.150
07.1.3.0.3 Yes mefSoamDmCfgSession
Status,
mefSoamNotificationDa
teAndTime Generated when the state of the delay measurement
(DM) session changes.
The notification is sent when the DM session is started
and stopped.
Sample trap message:
DOT1AG: The CFM session started for MA
index 1, MD index 1, MEP id 1
mefSoamDmThr
esholdCrossing
1.3.6.1.4.1.150
07.1.3.0.5 Yes mefSoamThresholdNotif
icationId,
mefSoamThresholdNotif
icationCfg,
mefSoamThresholdNotif
icationCount,
mefSoamThresholdSus
pect,
mefSoamNotificationDa
teAndTime Generated when the value of the crossing object from
the mefSoamDmThresholdTable (as indicated by the
mefSoamThresholdNotificationId) is exceeded during
the current measurement interval.
The notification is sent when the threshold crosses as
per mefSoamDmThresholdCrossing.
Sample trap message:
DOT1AG: The CFM session for MA index 1,
MD index 1, MEP id 1 has crossed the
maximum threshold value
mefSoamLmSe
ssionStartStop
1.3.6.1.4.1.150
07.1.3.0.2 Yes mefSoamLmCfgSession
Status
mefSoamNotificationDa
teAndTime Generated when the state of the loss measurement
(LM) session changes.
The notification is sent when the LM session is started
and stopped.
Sample trap message:
The SLM session started for MA index 1,
MD index 1, MEP id 11 Session index 1
mefSoamLmThr
esholdCrossing
1.3.6.1.4.1.150
07.1.3.0.4 Yes mefSoamThresholdNotif
icationId
mefSoamThresholdNotif
icationCfg
mefSoamThresholdNotif
icationCount
mefSoamThresholdSus
pect
mefSoamNotificationDa
teAndTime Generated when the value of the crossing object from
the mefSoamLmThresholdTable (as indicated by the
mefSoamThresholdNotificationId) is exceeded during
the current measurement interval.
Sample trap message:
The LMM session started for MA index 1,
MD index 1, MEP id 11 Session index 1
has crossed the maximum threshold
value
.