Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 442)

416 Unified IP MIB Reference
53-1003106-01
IPv6 access list table
41
IPv6 access list table
The following table contains the IPv6 access list entries supported on the Brocade NetIron devices.
fdryIpv6AclSourceOperand2
brcdIp.1.2.16.1.1.1.1.9
Syntax: Unsigned32 Read-create This object refers to the source transport protocol port
number of the operand 2.
fdryIpv6AclDestinationIp
brcdIp.1.2.16.1.1.1.1.10
Syntax: Ipv6Address Read-create The destination IPv6 address.
fdryIpv6AclDestinationPrefixLen
brcdIp.1.2.16.1.1.1.1.11
Syntax: Unsigned32 Read-create The destination IPv6 address prefix length.
fdryIpv6AclDestinationOperator
brcdIp.1.2.16.1.1.1.1.12
Syntax: Operator Read-create The type of comparison to perform. This applies only to
TCP or UDP.
fdryIpv6AclDestinationOperand1
brcdIp.1.2.16.1.1.1.1.13
Syntax: Unsigned32 Read-create This object refers to the destination transport protocol
port number of the operand 1.
fdryIpv6AclDestinationOperand2
brcdIp.1.2.16.1.1.1.1.14
Syntax: Unsigned32 Read-create This object refers to the destination transport protocol
port number of the operand 2.
fdryIpv6AclEstablished
brcdIp.1.2.16.1.1.1.1.15
Syntax: RtrStatus Read-create Enables or disables the filtering of established TCP
packets for which the ACK or RESET flag is on. This filter
applies only to the TCP transport protocol.
fdryIpv6AclLogOption
brcdIp.1.2.16.1.1.1.1.16
Syntax: TruthValue Read-create The log flag. This should be set to one, which enables
logging.
fdryIpv6AclComments
brcdIp.1.2.16.1.1.1.1.17
Syntax: DisplayString Read-create A description of the individual ACL entry.
fdryIpv6AclRowStatus
brcdIp.1.2.16.1.1.1.1.18
Syntax: RowStatus Read-create Creates or deletes an ACL entry.
fdryIpv6AclVlanId
brcdIp.1.2.16.1.1.1.1.19
Syntax: FdryVlanIdOrNoneTC
NOTE: This object is supported only on
the Brocade MLXe, Brocade
NetIron MLX, Brocade NetIron
XMR, Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-create An optional VLAN ID to match against the incoming
packets. By default, the VLAN ID field is ignored during
the match and the value 0 is returned.
Name, OID, and syntax Access Description