Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 280)

254 Unified IP MIB Reference
53-1003106-01
Power over module table
15
Power over module table
The following table shows the configuration of modules on the FastIron X series devices. The
information in this table is available in the output of the show module CLI command.
Name, OID, and syntax Access Description
snAgentPoePortNumber
brcdIp.1.1.2.14.2.2.1.1
Syntax:InterfaceIndex Read-only The port number in the ifIndex value.
snAgentPoePortControl
brcdIp.1.1.2.14.2.2.1.2
Syntax: Integer Read-create Powers on or off the inline power on a port. If a port does not have
inline power capability, reading this object returns other(1). Valid
values are:
•
other(1)
•
disable(2)
•
enable(3)
•
enableLegacyDevice(4)
snAgentPoePortWattage
brcdIp.1.1.2.14.2.2.1.3
Syntax: Integer32 Read-create Adjusts the inline power wattage. Valid values are from 1000 through
15400(IEEE802_3AF)/30000(IEEE802_3AT). Each unit is in
milliwatts. This object can only be set after snAgentPoePortControl
has been set to “enable(3)” or “enableLegacyDevice(4)”. If a port
does not have inline power capability, reading this object returns an
undefined value.
snAgentPoePortClass
brcdIp.1.1.2.14.2.2.1.4
Syntax: Integer32 Read-create Adjusts the inline power class. Valid values are from 0 through
3(IEEE802_3AF)/4(IEEE802_3AT). This object can only be set after
snAgentPoePortControl has been set to “enable(3)” or
“enableLegacyDevice(4)”. If a port does not have inline power
capability, reading this object returns an undefined value.
snAgentPoePortPriority
brcdIp.1.1.2.14.2.2.1.5
Syntax: Integer Read-create Shows the inline power allocation priority for the power device:
•
invalid(0) - Not a POE port
•
critical(1)
•
high(2)
•
low(3)
•
medium(4)
•
other(5)
snAgentPoePortConsume
d
brcdIp.1.1.2.14.2.2.1.6
Syntax: Integer32 Read-only Amount of inline power consumed by the port. Each unit is in
milliwatts.
snAgentPoePortType
brcdIp.1.1.2.14.2.2.1.7
Syntax: DisplayString Read-only Inline power device type: 802.3af, 802.3at, or legacy device.