Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 164)

138 Unified IP MIB Reference
53-1003106-01
Image and configuration file download and upload
5
Name, OID, and syntax Access Description
snAgImgFname
brcdIp.1.1.2.1.6
Syntax: DisplayString Read-write Shows the name of the image file, including path, that is currently
associated with the system. When the object is not used, the value is
blank. It can have up to 32 characters.
snAgImgLoad
brcdIp.1.1.2.1.7
Syntax: Integer Read-write Downloads or uploads a new software image to the agent. Use one of
the following values in an SNMP set:
•
uploadMPPrimary(19) – Uploads the primary image from the
management processor flash memory to the TFTP server.
•
downloadMPPrimary(20) – Downloads the primary image from
the TFTP server to management processor flash memory.
•
uploadMPSecondary(21) – Uploads the secondary image from
the management processor flash memory to the TFTP server.
•
downloadMPSecondary(22) – Downloads the secondary image
from the TFTP server to management processor flash memory.
•
downloadSPPrimary(24) – Downloads the primary image from the
TFTP server to secondary processor flash memory.
•
downloadSPSecondary(25) – Downloads the secondary image
from the TFTP server to secondary processor flash memory.
•
uploadMPBootROM(26) – Uploads the Boot from the
management processor flash memory to the TFTP server.
•
downloadMPBootROM(27) – Downloads the Boot from flash
image from the TFTP server to management processor flash
memory.
•
uploadMPBootTFTP(28) – Uploads the Boot from TFTP image
from management processor flash memory to the TFTP server.
•
downloadMPBootTFTP(29) – Downloads the Boot from TFTP
image from the TFTP server to management processor flash
memory.
•
uploadMPMonitor(30) – Uploads the Monitor image from
management processor flash memory to the TFTP server.
•
downloadMPMonitor(31) – Downloads the Monitor image from
the TFTP server to management processor flash memory.
•
downloadSPBootROM(32) – Download the Boot image from the
TFTP server to secondary processor flash memory .
•
downloadSPMonitor(33) - Download the monitor image from TFTP
server to SP flash.
The following messages may be displayed:
•
normal(1)
•
flashPrepareReadFailure(2)
•
flashReadError(3)
•
flashPrepareWriteFailure(4)
•
flashWriteError(5)
•
tftpTimeoutError(6)
•
tftpOutOfBufferSpace(7)