Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 580)

554 Unified IP MIB Reference
53-1003106-01
DVMRP routing next hop table
53
DVMRP routing next hop table
The DVMRP routing next hop table contains information on the next hop for routing IP multicast
datagrams.
NOTE
The following table is not supported on the Brocade MLXe, Brocade NetIron MLX, Brocade NetIron
XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
Name, OID, and syntax Access Description
snDvmrpRouteTable
brcdIp.1.2.5.1.15 None The DVMRP route table.
snDvmrpRouteEntryIndex
brcdIp.1.2.5.1.15.1.1
Syntax: Integer32 Read-only The table entry index.
snDvmrpRouteSource
brcdIp.1.2.5.1.15.1.2
Syntax: IpAddress Read-only Shows the network address of the source. This object plus the
value of the “snDvmrpRouteSourceMask” object identifies the
sources of this entry.
snDvmrpRouteSourceMask
brcdIp.1.2.5.1.15.1.3
Syntax: IpAddress Read-only Shows the network mask of the source. This object plus the value
of the “snDvmrpRouteSource” object identifies the sources of
this entry.
snDvmrpRouteUpstreamNeighbor
brcdIp.1.2.5.1.15.1.4
Syntax: IpAddress Read-only Shows the address of the upstream neighbor (for example, RPF
neighbor) from which IP datagrams were received.
snDvmrpRouteVifIndex
brcdIp.1.2.5.1.15.1.5
Syntax: Integer32 Read-only The value of snDvmrpVInterfaceVifIndex for the virtual interface
on which IP datagrams sent by these sources are received.
snDvmrpRouteMetric
brcdIp.1.2.5.1.15.1.6
Syntax: Integer32 Read-only Shows the number of hops to the source subnet.
snDvmrpRouteExpiryTime
brcdIp.1.2.5.1.15.1.7
Syntax: Time ticks Read-only Shows the amount of time remaining before this entry will be
aged out.
Name, OID, and syntax Access Description
snDvmrpRouteNextHopTable
brcdIp.1.2.5.1.16 None The DVMRP routing next hop table.
snDvmrpRouteNextHopSource
brcdIp.1.2.5.1.16.1.1
Syntax: IpAddress Read-only Shows the network mask address of the source. This object
plus the
“snDvmrpRouteNextHopSourceMask” object
identify the sources of the next hop.
snDvmrpRouteNextHopSourceMask
brcdIp.1.2.5.1.16.1.2
Syntax: IpAddress Read-only Shows the network mask of the source. This object plus the
“snDvmrpRouteNextHopSource” object identify the sources
of the next hop.