beautypg.com

Sntraperrordisableaction, Sntrapstprootguardexpire, Sntrapportloopdetection – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual

Page 747: Traps for optics, Sntrapopticalmonitoringwarn ing, Sntrapopticalmonitoringalar m

background image

Unified IP MIB Reference

721

53-1003106-01

Proprietary traps

67

Traps for optics

The following table contains traps that are supported on the Brocade NetIron MLX, Brocade MLXe,
Brocade NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.

snTrapErrorDisableAction
brcdIp.0.154
NOTE: This object is not

supported on the
Brocade NetIron MLX,
Brocade MLXe, Brocade
NetIron XMR, Brocade
NetIron CES, and Brocade
NetIron CER series
devices.

ifIndex,
snAgGblTrapMes
sage

Notification

The SNMP trap that is generated when an
interface error-disable is hit or recovery
times out.
Sample trap message:
Brocade Trap: Error-disable

hit or recovery times out.

snTrapStpRootGuardExpire
brcdIp.0.160
NOTE: This object is not

supported on the
Brocade NetIron MLX,
Brocade MLXe, Brocade
NetIron XMR, Brocade
NetIron CES, and Brocade
NetIron CER series
devices.

ifIndex,
snVLanByPortCfg
VLanId,
snAgGblTrapMes
sage

Notification

The SNMP trap that is generated when a
port is re-enabled after it has been disabled
because it received a BPDU packet and
BPDU Guard is enabled.
Sample trap message:
Brocade Trap: STP BPDU Guard

Expire.

snTrapPortLoopDetection
brcdIp.0.161

ifIndex,
snVLanByPortCfg
VLanId,
snAgGblTrapMes
sage

Notification

The SNMP notification is generated when a
port loop is detected.
Sample trap message:
Brocade Trap: LOOP DETECTION:

VLAN , port /

detect, putting into

err-disable state

Trap name and number

Varbinds

Severity

Description and trap message

snTrapOpticalMonitoringWarn
ing
brcdIp.0.1003
NOTE: This trap is also

supported on the
FastIron devices.

snAgGblTrapMessage

Warning

A warning occurred during optical
monitoring.
Sample trap message:
Latched high Temperature

alarm, port /

snTrapOpticalMonitoringAlar
m
brcdIp.0.1004
NOTE: This trap is also

supported on the
FastIron devices.

snAgGblTrapMessage

Alerts

An alarm occurred during optical
monitoring due to a low temperature in the
device.
Sample trap message:
Latched low Temperature alarm,

port /

Trap name and number

Varbinds

Severity

Description and trap message

This manual is related to the following products: