Snl4realserverporthistorycontro lowner, Snl4realserverporthistorycontro lstatus, Real server port history group table – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 694: Snl4realserverporthistorytable, Snl4realserverporthistoryindex, Snl4realserverporthistorysampl eindex, Snl4realserverporthistoryinterv alstart, Snl4realserverporthistoryreceiv epkts, Snl4realserverporthistorytrans mitpkts, Snl4realserverporthistorytotalc onnections
668
Unified IP MIB Reference
53-1003106-01
Real server port history group table
65
Real server port history group table
The real server port history group table contains history data samples for each port on the real
server.
snL4RealServerPortHistoryContro
lOwner
brcdIp.1.1.4.28.3.1.6
Syntax: DisplayString
Read-write
The administrator who owns or configured this entry.
snL4RealServerPortHistoryContro
lStatus
brcdIp.1.1.4.28.3.1.7
Syntax: Integer
Read-write
The state of this entry:
•
valid(1)
•
createRequest(2)
•
underCreation(3)
•
invalid(4) – This entry will be deleted from the table if it is
set to this state.
Name, OID, and syntax
Access
Description
Name, OID, and syntax
Access
Description
snL4RealServerPortHistoryTable
brcdIp.1.1.4.28.4
None
Real server port history group table.
snL4RealServerPortHistoryIndex
brcdIp.1.1.4.28.4.1.1
Syntax: Integer
Read-only
Shows the index entry as identified by
“snL4RealServerPortHistoryControlIndex”
snL4RealServerPortHistorySampl
eIndex
brcdIp.1.1.4.28.4.1.2
Syntax: Integer
Read-only
An index that uniquely identifies this particular sample among all
samples associated with the same entry. This index starts at 1
and increases by one as each new sample is taken. There can be
up to 2,147,483,647 samples.
snL4RealServerPortHistoryInterv
alStart
brcdIp.1.1.4.28.4.1.3
Syntax: Time ticks
Read-only
The value of sysUpTime at the start of the interval used to
measure data samples.
If the probe keeps track of the time of day, set the data sampling
to start at the beginning of the next hour.
NOTE: Following this rule may require the probe to delay the
collection of the first sample for an entry, because each
sample must be of the same interval. Also, data for the
sample that is currently being collected is not accessible
in this table until the end of its interval.
snL4RealServerPortHistoryReceiv
ePkts
brcdIp.1.1.4.28.4.1.4
Syntax: Counter
Read-only
Shows the number of packets the ServerIron has received from
the real server.
snL4RealServerPortHistoryTrans
mitPkts
brcdIp.1.1.4.28.4.1.5
Syntax: Counter
Read-only
Shows the number of packets the ServerIron sent to the real
server.
snL4RealServerPortHistoryTotalC
onnections
brcdIp.1.1.4.28.4.1.6
Syntax: Counter
Read-only
Shows the total number of client connections on the real server.
A connection consists of two sessions: the client-to-server
session and the server-to-client session.